Which Hammer Type Should I Buy?
A Pro’s Guide to Hammers: Pros & Cons
• Easy to use. You don’t need any special tools or experience.
• Great for beginners and experienced craftsmen alike.
• Lightweight, which makes it easy to carry around.
• Not suitable for all jobs and tasks; some may prefer a heavier tool.
• Not suitable for heavy duty work like cutting through steel beams.
Best Wood Handle Hammer Weight: 7 lbs. 2 ozs. (2 kg)
Weight: 1 lb. 8 ozs. (0.45 kg)
Blade Length: 3 in. (76 mm)
Overall length: 6 in. (152 mm)
The Best Smooth Face Hammer Weight: 5 lbs. 10 ozs. (1 kg)
Weight: 0.8 lb. (.3 kg)
Blade Length: 4 in. (111 mm)
Overall length: 5 in. (127 mm)
The Best Framing Hammer Weight: 5 lbs. (2 kg)
Weight: 2 lb. 6 ozs. (1 kg)
Blade Length: 4 in. (102 mm)
Overall length: 8 in. (203 mm)
Other Types of Hammers There are many different types of hammers; however, not every type will be suitable for every job. You can use a claw hammer for light carpentry work, driving nails into wood and shaping wood. When it comes to heavy-duty tasks, using a ball peen hammer is more suitable as the weight behind the swing will be more effective and cause more damage to the object you are hitting. Below are some of the most common types of hammers and what they’re typically used for:
Claw hammer: Used for carpentry, shaping metal and driving small nails.
Ball peen hammer: Used for heavy-duty tasks such as shaping metal, demolition work and removing nails.
Mason’s hammer: Has a flat end on one side and a pointed end on the other, and is used for masonry work.
Tack hammer: Smaller than the typical claw hammer, and is used for tacking fabric and leather.
Types of Heads There are many different types of heads on hammers, each for a different purpose. The claw hammer is a typical example of a hammer head, and is used for both light carpentry work and heavy-duty tasks. The claw on one side of the head can be used for pulling nails out, but also serves other purposes such as removing wood when shaping it. The flat head is used for driving nails and is found on most hammers.
The ball peen hammer, typically used for heavy-duty work like shaping metal and demolition, is an example of a hammer head with two faces, one with a flat surface and the other with a rounded surface. The mason’s hammer, also known as a bricklayer’s hammer, is a good example of a hammer head shaped specially for a specific purpose. It has a flat end on one side for spreading mortar and a pointed end on the other for tapping bricks into place.
FAQ’s Q: What is the difference between a framing hammer and a claw hammer?
A: Framing hammers are heavier and thinner than claw hammers, and are used for heavy-duty tasks such as cutting and splitting wood, removing nails, and shaping wood. Claw hammers are also heavier and thicker than standard hammers, and can be used for both heavy and light carpentry tasks.
Q: What is the difference between a ball peen hammer and a mason’s hammer?
A: The main difference is in their head shape. The head of a mason’s hammer is broad and flat on one side and has a curved, pointed end on the other. The ball peen hammer has a round face on one side and a flat face on the other.
Q: What is a tack hammer?
A: The head of a tack hammer, as the name suggests, is small and thin with a sharp point. They can be used to tack fabric and leather, hence the name. They are also good for fine woodworking.
Sources & references used in this article: