Werner PD6210-4C Fiberglass Podium Ladder with Casters


Werner PD6210-4C Fiberglass Podium Ladder with Casters

The Werner PD6210-4C fiberglass podium ladder with casters is one of the most popular models available today. This model offers a great combination of style and function. Its unique design allows it to easily climb up stairs or even over fences without any difficulty.

It’s easy to assemble and disassemble, making it ideal for those looking for a simple yet effective solution.

Features:

Made from high quality polyester fabric; very durable and long lasting.

Easy assembly with no tools required. No glue needed either! (We recommend using superglue)

Fits into standard garage door opening dimensions of 4′ x 6′. (5′ x 10″ with casters)

Uses 1/2″ steel hardware.

Heavy duty nylon webbing straps hold the ladder securely in place.

Includes two caster wheels, which allow the ladder to be raised and lowered for easy access to your basement floor. (Note: caster wheels are not included.)

Werner PD6210-4C Fiberglass Podium Ladder with Casters - realmanguide.net

Specifications: Weight: 2 lbs 0 oz (1 kg). Height: 16″ H x 9″ W x 18″ D (46 cm X 36 cm X 45 cm). Width at top edge of casters: 5″ W (12.7 cm).

If your country or state does not allow you to receive these items due to their laws. Please do not place an order.

This kit is designed to give you everything you need to make and use your own ladder without tools or hardware. The kit contains:

2 fiberglass support poles (1.5″ in diameter, 16′ long)

1 pair of fiberglass spreader poles (5″ in diameter, 4′ long)

2 heavy duty nylon straps with clips

2 small pulleys with rope

2 large pulleys with rope

1 sheet of instructions

Werner PD6210-4C Fiberglass Podium Ladder with Casters on realmanguide.net

The fiberglass spreader poles will be assembled permanently to the top of the ladder, and the support poles will be screwed into the bottom of the spreader poles. The steps are made from fiberglass and are designed to slide up and down the support poles. To raise and lower the ladder, simply move the steps up and down the poles.

Assembly is easy and takes about 30 minutes. You will need a cross-head (Phillips) screwdriver and a hammer to fasten the spreader poles to the top of the support poles.

Note: The PD6210-4C is our best selling fiberglass podium ladder with casters model. This kit includes everything you need to build a 4-ft high (from the ground), 8-ft long, and 5-ft wide ladder. If you need a longer or shorter ladder or want to raise and lower your ladder manually rather than using the included casters, we also sell the individual parts and components so that you may mix-and-match:

These are only available in the US and Canada. If you live outside of North America, please order from your local distributor. If you don’t find a distributor in your area please contact us and we will help you locate one.

Sources & references used in this article: