What is a Vessel Screwdriver?
A vessel screwdriver is a tool used to open or close vessels such as wine bottles, beer kegs, soda cans and other metal containers. A vessel screwdriver is usually made from stainless steel with a flat head blade. These tools are commonly referred to as screwdrivers because they have small Phillips-head screws on them. They are often used to remove gas caps from bottles, unscrew nuts and bolts from beer kegs, and loosen up some of the seals on wine bottles. Some vessels may require special tools for opening them properly. For example, some beers need to be opened using a screwdriver rather than a bottle opener.
The term “screwdriver” comes from the fact that these tools are typically screwed into the side of the container where it fits snugly against its wall. The screwdriver is then used to pry off the seal.
Why Use a Vessel Screwdriver?
Screwdrivers are useful when removing gas caps from bottles, unscrewing nuts and bolts from beer kegs, loosening up some of the seals on wine bottles, and many other tasks. They are easy to use and do not damage any part of your device. You can easily replace them if they wear out or break down due to normal usage.
How to Choose a Vessel Screwdriver?
There are a few important factors that you must consider when choosing a vessel screwdriver. First of all, you should choose on that will fit properly in your hand. It should be comfortable to grip and use over longer periods of time. You should also try to choose one that fits snugly against the bottle. This is especially important when trying to loosen or tighten bottle caps.
The blade of the screwdriver should be made from stainless steel if possible. This material resists rust and other forms of corrosion, ensuring that it will last for a long time. You may also want to choose a vessel screwdriver that comes with an additional handle. This ensures that you get a firm grip on the tool while using it.
Finally, you may want to choose a vessel screwdriver with a built in bottle opener. This will make opening bottles much easier and quicker than traditional tools. You should be able to find a vessel screwdriver that meets all of your needs at a great price.
How to Use a Vessel Screwdriver?
Using a vessel screwdriver is very easy. First, you will need to locate the seal on the bottle that you need to loosen or tighten. This will usually be located on the top or bottom of the container. You may need to turn the bottle until you find the seal you need to use.
Next, you should choose the right tool for opening your vessel. Most seals are opened using a flathead blade with a notch in the middle of it. This notch will fit over the edge of the cap, ensuring that it doesn’t slip off of the screwdriver and fall back into the vessel. You should use moderate pressure when twisting and turning the screwdriver to loosen or tighten the seal.
Finally, you should rinse off your screwdriver and store it safely for future use. These tools are inexpensive and easy to replace. You can find replacement screwdrivers at most grocery stores or at a restaurant supply store.
Vessel Screwdriver Tips
A lot of people struggle with opening bottle caps when they first start using these vessels. The trick is to get the bottle seal as dry as possible before opening it. Moist hands can drastically increase the friction and make it harder to get the cap off. You should always open vessels with wet hands over a sink to remove excess water from your skin.
You should also try to eat or drink as little as possible before opening a seal. The more food or liquid in your stomach, the more pressure you’ll have to exert to get that seal off. Drink only as much as you need and feel the seal loosening before opening it completely.
Some people like to use a device known as a vessel key to open their vessels. These keys can be used by anyone, regardless of hand size or strength. They also never wear out and can be used over and over again. If you have trouble opening vessels, you may want to find a vessel key online and give it a try.
Vessel screwdrivers are very affordable and can be found just about anywhere. They are great tools for anyone who needs to open bottles on a regular basis. You can even find specialized vessel keys that work with larger jar seals or bottle caps. No matter what type of vessel you need to open, there is a tool that will help you do the job safely and easily.
Sources & references used in this article:
- Multi-function tool for surfers (I Madarieta – US Patent App. 10/870,291, 2005 – Google Patents)
- Torque limiting drawing holder nut wrench (AM Moore – US Patent 5,287,775, 1994 – Google Patents)
- Spring-loaded screwdriver with cover and changeable heads (AC Gwin Sr – US Patent 6,128,982, 2000 – Google Patents)
- Nickel release from tools on the Swedish market (C Lidén, E Röndell, L Skare, A Nalbanti – Contact Dermatitis, 1998 – Wiley Online Library)
- Tool bit (JM DeBaker – US Patent App. 29/383,445, 2011 – Google Patents)
- Insert bit (JM DeBaker – US Patent App. 29/363,247, 2011 – Google Patents)
- Magnetic connecting tube for a screwdriver head (P Lin – US Patent 6,666,114, 2003 – Google Patents)