SimpleSENCE Water Leak Detector with WiFi Alerts:
What Is A Wifi Detection?
A wireless detection is a device that detects the presence of water or other substances in a room through radio waves. There are many types of such devices. Some are simple and inexpensive while others have sophisticated sensors and software that allows them to work better than human senses could ever detect.
The most common type of wireless detection is the one that uses a small transmitter (or receiver) that emits radio waves. These transmitters typically use a frequency range between 2 and 30 MHz. They are usually mounted near walls or ceilings and emit radio signals at those frequencies. When they receive these signals, they pick up the reflections back from objects in their field of view.
These reflectors are called “receivers” because they can recognize the signal coming from a specific object.
In general, these receivers are used in rooms where there is no direct line of sight to the transmitting device. For example, if you were using your cell phone to check whether there was any water leaking into your bathroom, then it would not be able to tell whether the water was coming out of a faucet or just sitting on top of the floor somewhere else in your house. In this scenario, you could place a water-sensitive receiver in your bathroom to check for any water leaking through the cracks around your bathtub or shower stall.
These receivers are very small and can be mounted using double-sided tape. They can be attached anywhere there is a direct line of sight between them and the transmitter. One drawback is that they are not very powerful and cannot go through walls or other solid objects.
Looking for a water leak is not as easy as it might seem. It is possible to detect leaks in your home by checking for wet spots and stains, but you can miss some. Water leaks are usually silent, which makes them especially dangerous. If the temperature or air pressure is too high or low, water pipes may freeze and burst.
When this happens, the damage can be extensive and costly to repair.
In some cases, you might not even notice the water leak until your home has suffered severe damage. While you probably already know that water is a precious resource and should not be wasted, it is easy to forget when a leak occurs slowly. You can place a water-sensitive receiver in your ceilings or walls to check for any potential leaks.
Although there are many things that can cause water damage in your home, you do not need to worry about whether the sensors will work properly. A water-sensitive receiver can pick up any type of water, even if it is dirty, muddy or mixed with other liquids.
Wifi Water Leak Detectors
A SimpleSENCE Wifi Leak Detector is exactly what you need to find water leaks in your home. It can be used to detect water damage on walls and ceilings. It works day and night and can detect the smallest traces of moisture. All you need to do is mount the sensor on a wall or ceiling in your home using the included mounting tape.
Then, connect to its WiFi signal and view the readings on your phone.
One of the best features of a Wifi Water Leak Detector is that it can be used to send you notifications when water is detected anywhere in your home. This makes it easier for you to check for potential leaks and fix them before they become expensive problems.
These devices can typically be used for one year before the battery needs to be replaced. Afterwards, you can easily replace the battery yourself. It is also versatile and can detect a wide range of water sources. From small leaks to large floods, this sensor is an excellent investment for your home or office.
Another great thing about a WiFi Water Leak Detector is that it can be combined with other sensors to monitor different aspects of your home. For example, you can pair it with a smoke alarm to check for both water and fire hazards. By placing several of these around your home, you can create an interconnected system that is easy to use and monitor on your phone.
While water sensors are certainly helpful in their own right, they are just one type of sensor that you can use to protect your home. If you would like to monitor different aspects of your property, we have several other options available. You can find sensors for smoke, CO2, human movement and more.
You can also choose whether you want direct WiFi monitoring or cloud monitoring. With direct WiFi monitoring, you can view your sensor readings directly on the device itself. If you choose cloud monitoring, readings are uploaded to the cloud. You can then view these readings through an online portal.
The choice is completely yours.
You can also choose from a variety of sensors that are designed to detect different things. Smoke and CO2 sensors are ideal for keeping your family safe from fire and hazardous gases. Door and window contacts can help you keep track of the comings and goings in your home or office. With so many options available, it is easy to find the perfect sensors to meet your needs.
To learn more about our wide selection of sensors, contact us today.
Sources & references used in this article:
- Wearable congestive heart failure management system (V Varadan, P Rai, SC Oh, PS Kumar… – US Patent App. 15 …, 2018 – Google Patents)