Silky Sugoi 360 Pruning Saw Review

Silky Sugoi 360 Pruning Saw Review: Pros & Cons


It’s very easy to use. You don’t need any special tools or experience to operate it. It doesn’t require much skill and you can do it with your eyes closed. Its user friendly design makes it easier for beginners to learn how to use it.

The saw cuts through wood easily without damaging the surface. It is also suitable for cutting up plastic and other materials too.

The saw is also capable of cutting through hardwood such as oak and maple. However, it isn’t recommended for cutting down branches due to its relatively short blades.

You can cut large pieces of wood with one pass. It is able to cut through thick boards with ease. The saw cuts through thin boards easily too but takes longer time than the other types of pruners due to the shorter blades.

Its blades are made from high quality stainless steel which is durable enough to withstand even the most extreme conditions. They are also heat treated so they won’t rust after being used for a long period of time.


As mentioned above, it is not suitable for cutting down branches due to its relatively short blades. It does have some downsides though. First off, it requires more effort to sharpen the blade since there aren’t many sharpening stones available at home. You have to either send it back to the manufacturer or to a professional in order to sharpen it.

Silky Sugoi 360 Pruning Saw Review on

It is relatively more expensive compared to other types of pruning saws.

Why Use A Pruning Saw?

There are two major types of pruning saws namely the anvil and the bypass type. Each one has its own set of advantages and disadvantages. It is up to the user to decide which one would be more suitable depending on their personal needs and preferences.

Anvil pruners have a smooth cutting action since they cut on the forward motion. This means that they produce less friction and don’t heat up as much as the bypass saws. They tend to be lighter but aren’t very good for thick branches or when you need to make a lot of cuts in a short period of time. Due to its design, the blade tends to kink and get stuck when hardened pieces of wood gets in its way.

This can be very frustrating since it requires a lot of force to remove it from the cut.

Bypass pruners have teeth that slide past each other to make the cut. They are heavier but more efficient for cutting through thick wood. The blade doesn’t get stuck or jammed when cutting branches and you don’t need as much effort to power through either. The only major drawback is that it tends to get very hot and builds up a lot of friction during the cutting process.

This can be a major problem when cutting through large branches since it requires a longer time before you can start cutting through the next one.

Pruning saws can be used for both industrial and home purposes. It saves you from having to use a chainsaw in order to cut wood. It is more suitable for precision cuts since you have more control over the blade. Most pruning saws are multi-purpose and can be used to cut through various types of materials such as wood, plastic and metal.

The blades are relatively easy to replace and are generally cheaper when compared to chainsaws.

Which Pruning Saw Is The Best?

It really depends on your personal preferences along with the type of work that you need to do with it.

If you need to use it at home and only for smaller branches, then the Felco #2 would be a good option. It is relatively cheap, durable and very easy to use. The smaller size makes it convenient to carry around in your toolbox or bag.

For professional use, the Corona RazorSharp is an excellent choice. Its sharp teeth cut through wood quickly. The longer length of the blade allows you to cut through thicker branches compared to the Felco #2.

Sources & references used in this article: