Square Head Screws Are Better For Deck Screws
If you are going to install a new deck screw, then it is better if the screw is screwed with a square head. If you have installed a deck screw before, then you will understand that it is very difficult to get the right size hole in your deck. You need to make sure that the screws fit into the holes properly so that they don’t cause any damage to your deck.
The reason behind using square head screws is because it is easier to see what direction the screw needs to go when you are installing them. Also, square head screws do not require a lot of torque which makes installation much faster.
There are several types of screws available in the market today; but there are only two types that come under the name “star” drive: Phillips and Torx. Both these type of drives have their advantages and disadvantages.
Phillips Screws Are Easier To Install
In general, Phillips screws are easier to install than other types of screws. They are easy to turn, and they are fastened easily. These screws can be used for almost all applications where square head screws would fail due to the difficulty of turning them. However, these types of screws may not work well in tight spaces such as small gaps between boards or between components.
Torx Screws Offer Better Grip And Durability
The Torx screws come with 6 points which offer better grip for the driver when compared to the Phillips head screws. These screws are great for high-torque applications where a lot of force is needed to keep the screw fastened. These types of screws can be used anywhere screws are needed despite space constraints. They are also less likely to round off.
There is a disadvantage though, in that you need a special tool to fasten or unfasten the screws.
Using The Right Screws Makes The Difference
When you are installing deck screws, then choosing the right screws for the job makes all the difference. Square head screws work best for decking. In fact, you can use these screws anywhere you need a lot of holding power regardless of the space constraints. If you are looking for a good place to buy screws at wholesale prices, then you can look online.
There are various websites that allow you to purchase screws in bulk at wholesale prices.
Thinking Outside The Box
It’s natural to want to use what you already have on hand when working on a project. Sometimes this can be a good thing and sometimes it isn’t, such as using wood screws in place of sheet rock screws. Although wood screws and sheet rock screws are very similar there are some major differences that make using the wrong screw a bad idea.
The first thing to consider is the size of the screw. Sheet rock screws are larger than wood screws and will be much more effective in holding the material in place. So while it may seem logical to use what you have on hand, it’s not always the best option.
Sheet rock and wood are both materials that are found around the house, but they are also very different. Sheet rock is designed to be hard so that it can hold up to years of abuse. Wood however is a much softer material. The hardness of the materials being joined also plays a role in determining what kind of screw to use.
So again, just using what you have on hand may not be the best option.
There are several different types of screws out there and not all of them are meant for the same jobs. For example, self tapping screws have a spiral groove cut into the head. They are used to attach materials together that are not alike, such as wood to wood, or particle board to plywood. These screws have sharp threads that cut their own hole as they are being installed.
Self tapping screws have a larger head and should only be used on softer materials. If you are using a self tapping screw in harder materials, you risk breaking the screw or even the tool you are driving it with.
Self Drilling Screws
Another type of screw that is good for drilling into many types of materials is the self drilling screw. These screws have sharp threads and a flat head. The flat head allows you to use a drill to put the screw in place instead of having to manually turn it into place. This type of screw is great for attaching items to your walls or ceiling.
The sharp threads allow the screw to easily drill into the material and even materials that you may not think could be drilled such as plastic. The self drilling property also helps the head to bite and stay fastened in place.
Screws with wings are very similar to self drilling screws, but they feature little wings around the outside of the screw.
Sources & references used in this article:
- Double pitch screw (S Gibson – FINE HOMEBUILDING, 2003 – THE TAUNTON PRESS, INC.)
- Double pitch screw (P O’Berry – US Patent App. 09/960,193, 2003 – Google Patents)
- Inedible Nuts & Non-Lightning Bolts (P O’Berry – US Patent App. 10/190,664, 2003 – Google Patents)
- Plastic composite deck screw (W Rynone – Tech Directions, 2010 – search.proquest.com)
- Threaded screw fastener characterized by high pull-out resistance, reduced installation torque, and unique head structure and drive socket implement or tool therefor (D Onofrio – US Patent App. 11/368,733, 2007 – Google Patents)
- Screw setter tool (CL Panasik, Y Gong – US Patent 7,207,248, 2007 – Google Patents)
- Concrete foundation form screw and method of use (M Fleckenstein – US Patent 6,497,166, 2002 – Google Patents)