Porter-Cable PC60TPAG Angle Grinder Cut-Off Tool Preview

Porter Cable PC60TPAG Angle Grinder Cut Off Tool Preview:

The Porter Cable PC60TPAG Angle Grinder Cut Off Tool is a cutting tool designed for use with the Porter Cable 7106 or 7108 series of grinders. It is a bit smaller than other cut off tools available for these types of grinders.

It is made from stainless steel and features a black finish. It comes with two Phillips head screws which are used to secure it to the back of the router table top. You will need one screwdriver to open up the box and remove it from its packaging.

You may notice that the cutter is not sharp enough to easily cut through thick material such as wood. However, it cuts through plastic and does a good job at removing paper clips.

The cutter has a rounded tip so it is easy to hold onto when using it.

It takes some practice before you get the hang of how to use this tool effectively. You will need a steady hand to ensure the cutter does not slip.

The tool makes a loud noise when in use so using it may annoy your neighbors. This tool is not powerful enough to be used as a substitute for an angle grinder and should only be used for light-duty cutting work.

You can use this tool to cut drywall or thin sheet metal. It will not cut through thick pieces of metal or anything harder than that.

This tool can be used with the corded grinder (code 7106) or the cordless grinder (model 7108). The manufacturer recommends using it with the cordless model since it is much lighter and will not overheat as fast. It should come off easily once you are done using it.

Porter-Cable PC60TPAG Angle Grinder Cut-Off Tool Preview - Picture

You can also use this tool to cut the top off of a can so that you can get to its contents. It does not work well with car tires since they are made from a harder rubber.

The tool is small enough for you to store in your pocket or keep it on your belt loop when you are done using it.

This tool does not come with any instructions or safety warnings. It can be used by adults and teenagers over the age of 16.

It is not a toy and should only be used by those who know how to operate power tools in a safe manner.

The cut off tool can be used for straight cutting. It has a hex-shaped shank which fits securely in the collet of the grinder.

There is no need to worry about it becoming a projectile since it will never rotate at an excessive speed during use. The cut off tool should not be used for grinding or sanding. Using it for such purposes may damage its cutting edge and will void the warranty.


The porter cable PC60TPAG angle grinder cut off tool preview is a good accessory to have if you need to cut through thin metal bars or sheets on a regular basis. It is easy to use and comes at a fair price.

The porter cable PC60TPAG angle grinder cut off tool preview is not very powerful and can only be used for light-duty cutting. It should not be touched by children and must only be used with extreme care by adults.

You can remove the tool once you are done using it by unscrewing the two screws. You should use the correct screwdriver to do this or you may cross-thread them.

The tool is not a suitable replacement for an angle grinder and should only be used for cutting soft metals such as drywall, thin sheet metal and plastic.

It is important to turn the tool off and let it cool down if you have been using it for more than 10 minutes continuously. Overheating may damage the tool.

heat up,

The tool comes with a 5-year warranty which is quite long when compared to most power tools. This means that in the unlikely event that you have an issue with it, you can get it replaced for free.

Porter-Cable PC60TPAG Angle Grinder Cut-Off Tool Preview on realmanguide.net

The tool is small and light enough to be stored in your toolbox or your pocket.

The grip on the grinder is quite comfortable and does not slip in the hand. This is good since working with power tools can get tiring if you don’t hold them properly.

The tool comes with a keyless chucking system which makes it easier to fit the cut off wheel into the grinder. It is very easy to use since all you need to do is press it in and turn it a quarter of a turn.

You can use the angle grinder for other things besides cutting. For instance, you can use with the grinding disk to sand wooden doors or the polishing disk to buff your car’s paintwork.

You can use the tool with a variety of other attachments such as the flap disk, belt sander and one of the several different types of cutting disks.

You can fit other types of cut off tools in place of the one that comes with it.

It is perfect for cutting drywall, fiberglass, copper pipes and sheet metal.

The tool has an on and off switch right next to the trigger. This makes it easy to use and prevents any accidents from occurring.

The metal guards that cover the front and rear of the grinder prevent you from coming into direct contact with the spinning disk. This reduces the chance of injury while using it.

This angle grinder is not designed to be a heavy duty power tool. It is best used for light-duty work such as cutting soft metals and polishing.

Using it for anything else will void the warranty and may damage it beyond repair.

Porter-Cable PC60TPAG Angle Grinder Cut-Off Tool Preview - Image

Always wear safety goggles when using this tool. The cutting disk kicks up a lot of dust and fine metal shavings which can easily get into your eyes and damage your vision.

The tool comes with two cut off wheels, a grinding disk and a polishing disk. These are small and need to be handled carefully since losing them could be problematic.

When changing the cut off wheel, it is best to remove the power tool from the power source before doing so. This is a common safety procedure to ensure that accidents do not happen.

The best thing you can do to maintain the tool is keep the cut off disk at the same angle when you are using it. Intentionally making quick changes to the angle can cause it to crack and break.

As with most power tools, this one comes with its own set of precautions as well as benefits.

Sources & references used in this article: