Paslode Im250A LI Cordless 16-Gauge Angled Finish Nailer Review:
The Paslode im250a is a corded electric nailer which uses two AA batteries to power it. The battery pack consists of one AAA battery and four C size alkaline cells (the same type used in most rechargeable mobile phones). These are charged through a standard wall outlet or via USB port when plugged into your computer.
The Paslode im250a is equipped with a digital display screen, which displays the current charge level of the batteries. A small LED light indicates when the battery packs are fully charged. When all four batteries have been charged to 100%, they will automatically shut off and remain inactive until needed again. The Paslode im250a comes with a built-in timer function, so you don’t need to worry about starting it up every time you want to use it.
The Paslode im250a comes with a variety of accessories, including a carrying case, charger cable, and cleaning brush. The included battery pack includes two AA batteries. You can buy additional batteries separately from Amazon or other online stores. There is no way to charge the batteries using any other source besides the paslode im250a itself. To recharge them you’ll need to plug them into a wall socket or USB port.
It is recommended to never store the battery for more than 30 days without using it, as this could lead to permanent damage and even explosion. It is best to store them with a charge of around 50%. To extend the lifespan of your batteries, it is best not to allow them to be completely drained before recharging them. If you find that the battery is taking longer to charge than it used to, it’s probably time to buy a replacement set.
The P250A is a very high-end finishing nailer and has many of the same safety features as other top-of-the-line Paslode finish nailers. It has a pressure sensitive safety that prevents the gun from firing if your hand isn’t firmly on the grip.
The nails that come with it are often criticized for being too short, so be sure to order some longer ones if you are using it for framing. The angled design allows you to reach into tighter areas than with a standard straight finished nailer.
The P250A also has an adjustable exhaust system which helps prevent the nails from blowing all over the place, which is particularly important when nailing near your head or in areas without much space. The battery can fire around 3,000 nails per charge, but this will of course vary depending on the length of the nails and what you’re using it for.
Many professionals prefer the P250A over its cordless counterparts due to its superior power and reliability. The battery lasts long enough to complete most projects, but it can run down quickly when used excessively. The kit does not include a case or bag of any kind, so you will need to get one if you want to safely transport it anywhere.
The P250A has a slightly larger head than other 18-gauge nailers. This enables it to sink the nails all the way into softwoods without splitting, which is why many professionals prefer it. It does, however, require a bit more force than competing models, so you might not want it for extended periods of time.
This tool isn’t just for finishing work. Many professional carpenters use it as their only tool on framing jobs. It comes with a jam clearance mechanism, so it rarely jams midway through a job.
The Paslode P250A is a state of the art 18-gauge finish nailer. It works with specially designed nails that have a plastic head and a shiny metal bottom. This design allows it to be used with both framing and finishing work.
The fuel cell lasts for around 4,000 nails, after which you will need to refill it. It takes around 5 minutes to refill a tank, during which time you can’t use the tool.
The fuel cells are designed to prevent leaks and spills. They are also recyclable, so when it’s time to replace them you can bring them back to your local hardware store for a discount on a new cell.
This tool runs on a butane fuel cell, which is worth mentioning because this is a relatively uncommon method of powering a pneumatic tool. The fuel cell powers a small cylinder which forces air down a tube to the tool’s nozzle.
The P310S has an adjustable exhaust, so you can direct the flow of air and the nails away from your face while working. It also runs much quieter than other comparable models.
The P310S is a straight 18-gauge nailer that drives a full strip of 300 small head nails at a time. It uses standard brad nails, so you can easily swap out the strip if you need to for a longer job. The plastic strip contains 3 separate tubes for the brads, so it never jams when used properly.
The FS200 is very easy to reload, as all you have to do is drop a new tube of fuel into the feed and away you go. The fuel cell sits right in the handle, so it’s always ready to go whenever you need it.
The Fuji Framing Fuel Cell is powered by butane gas, so it’s a relatively uncommon type of fuel for nail guns. The benefits to this is that the fuel is clean burning and doesn’t cause as much air pollution.
The only flaw with the M3Si is that it can’t sink nails completely into wood, so you will need to get a different gun if you need flush or near flush finishes.
The M3Si comes with a convenient tool belt hook, so you will always have it on you when you need to reload. The fuel cell lasts long enough to complete most projects, and it only takes a few seconds to switch out when it’s empty.
The M3Si is the only 18-gauge brad nailer that uses an HPA tank instead of a traditional air compressor. HPA stands for “high pressure air”, which is a more advanced type of compressed air than what you find in your average nail gun.
What is the Best 18-Gauge Brad Nailer?
If you’re working in a professional capacity as a carpenter, it would be wise to get the P310S for its power and versatility. However, if you’re a professional that works with smaller wood pieces and needs more precision, the P320S is a good choice for you. The Paslode is the most powerful of the three, so it’s best reserved for framing houses and working on big jobs. If you’re a pro that runs their own framing business, then the P310S is the best one for you. If you’re a professional that works with smaller wood pieces and needs more precision, the Paslode is the best one for you.
If you’re someone that only ever does woodworking as a hobby, then 18-gauge brad nailers are a little overkill. Your main concern is going to turn out nice, so you’re better off getting a lighter brad nailer that’s easier to hold for extended periods of time. The Bostitch is the best choice here, as it’s much lighter and more comfortable to work with.
How to Choose the Best 18-Gauge Brad Nailer
When picking out a new brad nailer, there are several key factors that you’ll want to keep in mind:
Normally, nail guns run on either compressed air, which is stored under pressure in a tank on the gun itself, or with a hose that connects from the gun to a compressed air tank that sits on the ground. Electric powered guns normally plug into the wall. Pneumatic nail guns are the most powerful, but require you to lug around an air compressor.
Electric models are great for small jobs close to an outlet, but you have to watch how often you use them, as they can overheat if used too much. Compressed air powered guns can keep going for a very long time without having to be refilled, but you do have to keep hauling around that big tank.
There are also hybrid models that use a mix of both. They’ve solved the main issues of corded and cordless models, but are still tethered to an air hose, so they’re not as flexible.
The size of the nail is also important. The most common size is 2-inch toenails, which are good for just about everything. You’ll run into trouble if you’re nailing into hardwoods, though, since they can split the wood. If this is a concern, then you might want to use a smaller 1-inch brad nail. They’re more expensive and harder to find, but they are much safer to use in delicate materials.
Different guns have different magazine capacities, so you’ll want to pick one that can fire as many nails as you’ll need before having to reload. If you’re not sure, then go with a gun that has a bigger capacity, since you can always fire fewer nails. If your gun is jammed and overflowing with nails, you can always pull out the tray at the bottom and push the rest back in.
Any time you’re using an automated tool, there’s always the possibility of jamming. Since nails are long and thin, they can get stuck inside the gun for any number of reasons. A good way to prevent jamming is to keep your gun clean and well-maintained. If you do happen to get a jam, never stick anything in the back to try to unjam it, as you could damage the mechanism. Just like with a cartridge gun, make sure there’s nothing left in the barrel or clip and keep it clean.
Another thing you can do to help prevent jams is to pick the right gun for the job. Some guns are better at driving in nails without splitting or missing the wood than others. Just keep in mind that no matter what you do, you’re still using a machine to shoot pieces of metal into wood, so there’s always the chance of a jam.
The last thing you want is your gun accidentally going off while you’re trying to reload it. Since these guns can fire several nails per second, even a slight trigger miscue could cause an injury. The best brad nailers have an automatic shutoff feature that turns the gun off after a certain amount of time to prevent this from happening.
Another safety feature to look for is a trigger lock that prevents the gun from firing until it’s engaged. This can prevent injuries if you have children or pets around that might stumble across an unattended gun.
Always be aware of where your fingers are when you’re reloading a brad nailer. They can get caught on the trigger and cause an accident if it’s not in the “off” position. The best guns have an automatic mechanism that disengages the trigger as soon as you pop in a new magazine. This prevents any accidents from happening and makes it easier to reload by allowing you to simply press a button rather than fumbling with a latch.
Snapping and Driving
Many people are confused by this, but there’s a difference between a brad nailer and a pin nailer. While both are used for building things, they’re designed for different purposes. A brad nailer is designed specifically for nailing thin pieces of wood together. This is what gives it its name, as “brads” are a type of short nail used for this purpose. Rather than penetrating the wood, they’re designed to hold the pieces together in a snug manner without going too far into the wood.
A pin nailer, on the other hand, is designed specifically for fastening two pieces of wood together.
Sources & references used in this article: