Organizing Screws and Nails Using Milwaukee Packout – Best Solution


Milwaukee Packout Hack – Best Solution

Organize your screw and nail collection using Milwaukee Packout. Here are some tips:

1) Choose the right size bin for your screws and nails.

If you have a small space, then choose a smaller bin; if you have lots of space, then choose a larger one. For example, if you have 5 x 8 inch space, then use 1 x 4 or 2 x 6 bin.

2) Use a plastic bag to keep all your screws and nails together.

You can buy them at any hardware store.

3) To prevent dust from entering inside the bin, put it in a closet where it will not get disturbed.

4) Make sure that the bin does not touch other items like bookshelves or tables.

Keep it away from these things so that dust cannot enter into the bin.

5) When organizing your screw and nail collection, make sure that you do not leave the bin open too much.

Do not leave it open for more than two hours.

6) After organizing your screw and nail collection, you can place the bin somewhere out of direct sunlight.

Make sure that there is no air circulation inside the bin during this time. Also make sure that there is no wind blowing outside the area where you placed your bin.

Organizing Screws and Nails Using Milwaukee Packout – Best Solution from our website

Nail Hammers

Always keep in mind that you can hit a nail with any hammer but not every hammer is right for the job. Just like regular hammers, there are different types and weights of nail hammers made for finish carpenters. They can have straight claws or curved claws and smooth faces or ridged faces. The curved face is good for pulling nails out while the straight claw makes it easier to place the nail where you want it in the first place.

Sand Paper

It isn’t just for wood. You can use fine grits of sand paper to smooth out drywall edges before you paint them. You can also give non-wood work surfaces a little bit of texture to make the paint adhere better. Just remember not to over do it or you’ll wind up taking off layers of whatever surface you are working on.

Paint Tray

A lot of people throw away those plastic trays that the pain cans come in. However, you can use them as a mini paint booth. Just tape up the bottom so that it is airtight and place your object inside. Make sure to use a good quality primer or spray paint in a well ventilated area.

Cordless Drill

Most people think of a cordless drill as a screwdriver but professional carpenters and other tradesmen know that they are also great for quickly driving nails. In fact some models have a special setting just for driving nails.

Battery Operated Knife

Organizing Screws and Nails Using Milwaukee Packout – Best Solution - realmanguide.net

A battery operated knife can come in very handy if you need to cut soft materials like caulk or insulation. They also come in very handy when you are working on something and don’t want to get your good quality knives all gunked up with adhesive or insulation. They’re also great for cutting open those frustrating packaging that manufacturers love to wrap everything in.

Rubber Mallet

A rubber mallet is a lot more safe to use than a regular hammer when dealing with glass objects like light bulbs or Pyrex dishes. It is also a lot more effective when you need to tap things into place but don’t want to risk scratching or denting them. Mostly, you will find that you use it when dealing with tile. It is easier to tap down tiles using a rubber mallet than to pick up a regular hammer and start whacking away at them.

While you are unlikely to find yourself working on a ship or in a machine shop you may very well run into some objects that are made of metal. In these circumstances, a rubber mallet can also come in handy when you need to whack down hanging objects like tin plates or light switch covers.

Cordless Circular Saw

When it comes to cutting drywall or paneling a cordless circular saw is hard to beat. If you have a narrow cut to make and don’t want to or can’t use a knife, this is definitely the way to go. They are also great for cutting plywood sheets down to size.

Caulk Gun

If you need to fill small areas like the cracks around windows or doors a caulk gun will save you loads of time. Not only that but you can get very small beads with one which is great for sealing up tiny gaps. If you have ever tried to do this with a tube of Liquid Nails you know that it is an incredibly frustrating process.

Putty Knives

If you ever need to fill holes or gaps in objects, a putty knife makes the whole process a lot easier. You can get them in different sizes to accommodate different sized spaces. They also help when you need to spread stuff like caulk or silicone around.

Parting Tool

If you ever need to pry up an object like a floor tile or shingle, a parting tool comes in really handy. It allows you to get beneath the item and pry it up without damaging the adjacent items. They come in very handy when you need to separate tiles or similar items without breaking them.

Measuring Tape

You should always have a measuring tape within reach because you never know when you are going to need one. Even if you think you know the size of something you might want to double check just to make sure. You’d be surprised at how often people guess incorrectly at the size of items. It is a common source of errors when working on projects.

Organizing Screws and Nails Using Milwaukee Packout – Best Solution at realmanguide.net

Ladders

The type of ladder you need depends on what you are going to be doing. The largest are known as extension ladders. They are big, heavy and not at all portable. You generally set them up against a wall and climb up to the roof to do your repairs from there. You should not try to move them around or carry them up a ladder because they are incredibly top heavy and can cause you to fall.

Step ladders are much smaller and lighter but only allow you to reach a certain height. These are a lot more manageable and safer to use because they have wide flat steps rather than narrow, round rungs. You can generally fold them up and carry them around from place to place which makes them easier to store as well.

Climbing up the side of a house with a ladder is dangerous enough but if you need to do so, an extendable ladder is the way to go. They come in various lengths but the common 8 or 10-foot variety is probably the best for what you need. Just remember that the longer ones are heavier and more unwieldy so be very careful when using one.

If you ever find yourself reaching for a chair to stand on while doing work around the house, you should probably get a step ladder instead. They are safer, more comfortable to use and a lot easier to store when you aren’t using them. Even a basic 6-foot model will increase your working space tremendously.

Having the right tool for the job makes any task much easier. At the very least you should have these basic tools in your garage or shed so you can handle most minor repairs yourself:

You should also keep any extra supplies like light bulbs, fuses, washers and other small parts in your workshop so you don’t have to make a separate trip when you find you need them.

Having the right tool for any given job will save you a lot of hassle and frustration.

The next selection on our agenda is safety equipment. This is just as important as having the right tool because, after all, you want to get the job done without getting hurt in the process.

Safety Glasses

Organizing Screws and Nails Using Milwaukee Packout – Best Solution - realmanguide.net

Whether you are using power tools or simply repairing something around the house, chances are there is going to be some sort of splintering or flying object that could hurt your eyes. Nothing is worse than wooden slivers getting in your eye so safety glasses should always be a given.

Most of the time these come with an assortment of interchangeable lenses so you can change them to meet the need at hand. They also come in a variety of styles to match any need from standard clear or tinted lenses for working outside to mirror and polarized lenses for bright conditions. Wearing a hat or visor will also help keep the sun out of your eyes as well.

The right safety glasses can even protect you from the effects of bright light generated by an explosion.

Ideally you should have a pair of safety glasses in your tool box, in your pocket and hanging on your shirt collar but that might be going a bit too far.

Safety Goggles

These lenses are larger and enclose the entire eye area. They afford much better protection and are perfect for working with any power tools so they should be a high priority when purchasing eye protection.

These come in either open-faced or full-faced versions with the full-faced being much more protective. Always opt for the full-face version unless you are working in an environment that doesn’t allow them due to limited vision range.

Welding Helmets and Goggles

When it comes to welding, there is a lot of concern for eye safety because a simple mistake can cause damage not just to yourself but anyone within the immediate vicinity. Many welders wear completely enclosing helmets with a dark visor that can be lowered down over the opening to provide full eye protection. These helmets come in either glass or plastic varieties and both offer excellent protection from flying sparks, radiation, ultraviolet light and even molten metal splash-back.

Paramedic Shears These are extremely sharp shears used by paramedics and rescue workers to quickly cut clothing and other materials without damaging the fabric and preventing the need to pull scissors from a person’s pocket. They are not really necessary for the average home handyman but they do make quick work of seatbelts and clothing after accidents so they can be a worthwhile investment.

They can also be used as field medical equipment for emergencies since they can cut bandages, strips of clothing, splints, etc…

Cordless Circular Saw

These are useful power tools that can help you handle lots of different jobs around the house. They are lightweight and easy to handle so they can make quick work of most projects.

Organizing Screws and Nails Using Milwaukee Packout – Best Solution - Image

You will need to be careful with these around wood, of course, but their true purpose is for cutting metal sheets, roofing materials, conduit, latticework and more. They can also be used for cutting tile and masonry.

In a survival situation you can use them to cut down small trees and cut them up for firewood.

Laser Measure

These handy pieces of equipment can be set up and aimed in a second and are excellent tools to have around when you need to know the distance between two points quickly. They come in an assortment of sizes for all sorts of different uses. The smaller ones can even be attached to your belt so they are always at your side.

There is no easier way to measure the distance between the wooden support beams in your basement and the height of the ceiling than with one of these. They are also great for measuring the length and width of large items that are difficult to move such as appliances and even trees if you need to know how much firewood you have.

Socket Sets

A socket set will contain a ratchet, a selection of socket bits that fit into the ratchet and a magnetic tray to hold the sockets. There is usually some space beneath the tray to store the bits.

They are used to fasten items to each other and themselves with bolts. A good socket set will cover most household bolts and screws and you should have one in every home workshop, toolbox and glove compartment.

Simple socket sets can be had for as little as $10 but for under $20 you can get a nice compact set that will last a lifetime. The person who builds homes for a living needs a large set with every imaginable socket but the average handyman will never need more than a good compact set.

You only really need one for each household so if you are getting one for yourself then your spouse, partner or kids can share. If you have sufficient budget, buy a set for each family member and store them all in the same place.

Organizing Screws and Nails Using Milwaukee Packout – Best Solution - Image

You can also get universal sockets that accept lots of different sized bits rather than just one size. These are very popular and can work like pliers, wire strippers and other tools. There is a whole range of uses but they are generally more expensive than normal sets and you need the right sized bits for the job so it’s wise to think about your needs first.

I recommend that you buy one of these for everyone in the family and either store them at home or keep them in your glove compartment so you always have one handy. You may not need to use them all the time but you will be very glad you had them when you do.

Sockets come in a range of standard sizes and it can save you money to buy cheap non-branded versions but if you are going to be using them a lot go for quality.

If you can afford it then get a set with a ratchet and a few extensions. This will make the job easier and takes up less space in your car.

The ratchet has a series of sockets of different sizes that you can “click” into position in the handle. You then tighten them by twisting the handle. With normal sockets, each time you need to apply more than a small turn on the bolt you have to take off the socket and turn the bolt with a wrench. With a ratchet, you can just keep turning until it’s tight.

Also try to get the ratchet with some extensions as these allow you access to hard to reach places.

There are also impact sockets that have thicker walls to reduce the risk or rounding off a bolt when applying a lot of torque. These are really only useful if you will be removing and installing a lot of very stubborn rusted or damaged bolts.

Crane – $500

Boat – $800

There are two ways you can go about paying for this item. The first is a simple cash payment of $750 to the harbormaster, this will allow you to park the “Cranestine” (as you have renamed her) in the harbor where she will be fairly safe but there is little else going for it. The second option is slightly more expensive at $800 but much more beneficial in the long run. You can pay the harbormaster to have a small dock built for the boat, this will allow you to live on it (and refuel and repair it) while docking it legally in harbor. You will just need to pay the standard fees each month.

The choice is ultimately up to you.

Organizing Screws and Nails Using Milwaukee Packout – Best Solution - Picture

Option 1 – $750

The harbormaster will allow you to park your boat (illegally) in a safe part of the harbor. This will save you money but your boat will be subject to the whims of the harbormaster and you may lose the boat at any time.

Option 2 – $800

The harbormaster will allow you to build a small dock for your boat, which will allow you to live on it as well as refuel and maintain it easily. In exchange you will pay him $100 each month.

choose option 1, buy the cheap car and save money

You need to decide whether you want to leave your vehicle at home or take it to sell in America.

If you leave it at home you will be able to carry more supplies (Food, water, fuel etc) but you will not have a “life boat” in America should things go wrong.

If you take it then you wont need to purchase supplies but you will only have one chance to get to America, if the car breaks down or gets stolen then you wont have anything.

As this is your only vehicle there is also the risk that someone may steal it while you are away.

Organizing Screws and Nails Using Milwaukee Packout – Best Solution on realmanguide.net

Option 1 – Take the Car

You take your car and leave all of your supplies behind. This means that you can take all of your money and buy supplies when you arrive in America.

You feel a little nervous about entering the country with absolutely no identification but you know that you wont be stopped as you will be entering unofficially. You fill up with fuel the night before your journey and set off through the night to America.

You reach the harbor just after dawn and find it fairly busy with work boats going in and out. You turn off down a side road out of sight and park the car as close to the water as possible. You leave all of your European papers in the car and take nothing with you except your keys. You intend to swim to an unattached dock which is fairly isolated and then board a work boat going to America.

You wade into the sea and feel the water temperature, it is surprisingly pleasant so you begin to swim. You swim out about 25 meters before turning to head towards the dock. You are halfway there when you suddenly become aware of a helicopter flying overhead.

You sink underwater and hold your breath but know that if they were looking for you then they would have helicopters patrolling the shoreline as well. You wait until the helicopter passes over and then break surface again. You take a breath and begin swimming again, trying to look nonchalant in case there are surveillance cameras on the helicopter. You get to within 10 meters of the dock before you feel arms grab your legs and pull you down into the water.

You struggle to break free but feel a fist strike you hard in the side of the head. Your ears are filled with water and you are barely conscious but still aware of strong hands grabbing your arms and tying them behind your back. Your legs are tied together and you are lifted out of the water and laid on a flat surface.

Sources & references used in this article: