Milwaukee Redstick Concrete Level Review


Milwaukee Screwdriver Screeshield Level Review:

The following are some basic facts about Milwaukee Screwdrivers:

Milwaukee Screwdrivers were invented in 1891 by Henry Knoedler, a German immigrant. They are made from iron, zinc and steel with a stainless steel blade. The blades are sharpened to a point.

They have been used since the early 1900’s and they still make them today.

There are different models of Milwaukee Screwdrivers. There is the Model I which was designed for use on flat surfaces, there is the Model II which was designed for use on sloped surfaces, and then there is the Model III which was designed for use on uneven ground such as cobblestone or brick pavement.

Most Milwaukee Screwdrivers come in two sizes. The smallest size is the Model I and it comes in three lengths. These include 1/4 inch, 3/8 inch and 1 inch. The largest size is the Model III which comes in six lengths including 5/16 inch, 3/8 inch, 7/32 inch and 9mm inches.

There are many more types and models of Milwaukee Screwdrivers. These were just some of the most common ones that you are likely to come across. Now, when using a screed level it is very important to choose the right type for your specific project if you want to get good results. If you don’t know what type of screed level to use then it is best to ask or hire a professional.

The best place to buy any type of Milwaukee Redstick is from a reputable hardware store such as Home Depot, or via online retailers such as Amazon. They can be found in most major cities and they are very inexpensive. They are easy to ship as well because of their relatively light weight. Most online retailers will also ship them free of charge if your purchase is high enough.

Best Screed Level:

Milwaukee Redstick Concrete Level Review | realmanguide.net

As we talked about before, there are many different types of screed levels. It is important to choose the right one for your project and this choice will depend greatly on the area that you are working on. A good place to start is by making a list of all the different things you need the screed level to do. Then, when you are choosing which ones to get, make sure that it can do all of these things. If you try to save money by buying a screed that is not long enough then you will have to pay more in shipping which will end up costing almost as much as just getting the right one in the first place.

There are some general types of screed levels which include metal tape measures, wooden levels and fiberglass screed. Each type has their own specific benefits and drawbacks so it is important to consider all of them before making a final decision.

Metal tape measures are very similar to the tape measures that you use to measure the length of pieces of wood or the height of door frames. The main difference is that metal tape measures are a lot more durable and they can be used for more than just measuring. They can also be used as a straight edge when you need to make a line in your project. The big problem with metal tape measures is that the edges aren’t all that straight so you have to have pretty steady hands if you want to make a line somewhere specific. Since it is just a tape measure, it only has measurements in inches and feet.

Wooden levels are very popular because they have two different types of vials. Most of them have the traditional spirit level vials on one end and the V shaped vial on the other. The V shaped vial is used in the same way as the traditional level. You just hold it level to make sure that it is level. The main advantage of wooden levels is that the edges are much straighter and you can use them to draw a line longer than the tape itself.

For this reason, many people prefer to use them instead of a metal tape when they are trying to make a straight line on their project. The major drawbacks of wooden levels is that they need to be refilled with fluid more often and they are a little bit more susceptible to damage.

Fiberglass screed levels are another popular type of screed level. They are very similar to the traditional spirit levels but they have the advantage of being made out of fiberglass so they are more resistant to damage. The only major drawback is that they aren’t as easy to find as metal tape measures and wooden levels. This might not be a problem for some people but it might be an inconvenience for others.

When it comes right down to it, you need to choose a screed level that is going to work best for you and your specific needs. Take the time to consider all of your options before making a final decision. It might even help to go to your local hardware store and physically look at each type of screed level so you can get a better idea of what they look like and how much they cost.

Metal Tape Measures

The metal tape measures are a lot more durable than your traditional tape measures. They can also be used to draw straight lines when you hold them up against something. However, they aren’t as straight as the other types of screed levels so they aren’t that great for making precise measurements or markings. Since they are metal, they can’t be used to check for level like the other types of screed levels.

Wooden Screed Levels

The wooden screed levels are great for ease of use and the price. If you are on a budget, then this is probably the best option for you. They are also really easy to use and very reliable. Just make sure that you don’t drop it because it could potentially break. The main drawback is that they aren’t as durable as the other types of screed levels.

Fiberglass Screed Levels

The fiberglass screed levels can be used for more than just making straight lines. The main benefit of these is that they are more resistant to breaking and are slightly more durable than the wooden levels. However, they are still pretty susceptible to damage if you aren’t careful with them. Just like the wooden levels, they are really easy to use and very reliable.

Milwaukee Redstick Concrete Level Review - realmanguide.net

The Best Screed Level – Our Reviews 2019

1. Starrett 12-inch Combination Level v_b

This is a really high quality level that can be used for multiple different measuring and leveling tasks. It has multiple different types of vials to allow you to check it from multiple different angles. It is made out of very strong material so it can withstand a lot of abuse without breaking.

This is a great screed level for the serious do it yourselfer who needs one screed level for all of their needs. It is so accurate that it is often used in engineering and professional construction.

Pros: Multiple vials allow for more accuracy

Very durable

Can be used for multiple different types of measuring and leveling Cons: Very pricy

2. Empire 25-Foot Fiberglass Leveling Rod

This screed level is made out of fiberglass so it is more resistant to damage than the wooden ones. It comes with a handy storage container that you can keep it in between uses. This makes it easy to transport and store when you aren’t using it.

This isn’t quite as durable as the metal tape measures but it is sturdier than the wooden levels. It is great for someone who needs a screed level that can withstand the outdoors and regular use but isn’t subjected to heavy-duty construction.

Pros: Durable

Comes with storage container

Sturdy enough to withstand regular outdoor use Cons: Fiberglass material isn’t as strong as metal

3. Empire 12-inch Wood Carpenter’s Square

Milwaukee Redstick Concrete Level Review | realmanguide.net

This level is wooden so it is very sturdy. It can be used for a lot of different tasks. It is even sturdy enough to stand on if you are laying tile or something similar. It has multiple different types of markings on it so you can use it for multiple different jobs.

The main drawback with this level is that it isn’t as durable as the other ones on our list. If you are using it on a regular basis, there is a chance that the markings will wear off over time.

Pros: Very sturdy

Can be used for multiple different types of measuring and leveling

Multiple markings for different types of jobs Cons: Not very durable

4. Empire 12-Inch Heavy-Duty Metal Carpenter’s Square

This is a metal screed level that is very durable and can withstand a lot of abuse without breaking or getting damaged. It comes with three stacked vials that allow it to be very accurate. It can be used for a wide variety of different jobs.

It isn’t quite as accurate as the other screed levels we have listed above. This is mainly due to the three stacked vials that allow it to be durable but take away from its accuracy.

Pros: Durable

Accurate enough for most jobs Cons: Not as accurate as other screed levels

Buyer’s Guide:

What Is A Screed Level?

A screed level is exactly what it sounds like. It is used to get a perfectly flat surface on the floor when laying something such as tile or hardwood. It is typically a long stick that is very accurate so you know when your floor is perfectly level.

How To Use A Screed Level

The first step in using a screed level is to take measurements of the area you need to make level. For most people, they will place the screed level on the floor and then make sure that both sides are the same distance from the walls.

Milwaukee Redstick Concrete Level Review - realmanguide.net

Once you have marked all of the areas that aren’t level with a pencil, you can go over with a trowel and then use your screed level to make sure everything is perfectly even. You will typically only need to use a screed level for larger jobs such as laying tile or hardwood flooring. This is because smaller jobs can typically be done with a tape measure and your eye.

Materials

Screed levels are typically made out of a few different materials. While wood was the original material that these were made out of, most modern screed levels are made out of either metal or fiberglass.

Metal screed levels are very durable but also tend to be a bit heavier than the other two materials. They also can potentially scratch your floor if you aren’t being careful. This is typically not a problem with fiberglass screed levels as they are much lighter and won’t scratch your floor.

Wooden screed levels are great because they are typically very accurate, especially the longer ones. They also can be very cheap so if you break one you aren’t out much money. The only drawback with wooden screed levels is that they typically aren’t as durable as metal or fiberglass and don’t last quite as long.

Size

In addition to the three different materials that screed levels are typically made out of, they also come in a wide variety of different sizes. Typically the length of the screed level is going to determine how accurate it is.

A lot of people don’t realize this but in order for a screed level to be perfectly level, it has to be equal distance from the floor on both sides. If one side is longer than the other, then the level isn’t accurate. This is why longer levels tend to be more accurate than shorter levels as you have more length to ensure that both sides are perfectly even.

Some screed levels also come with vials that are filled with a special type of oil. These allow you to see exactly how level your screed level is without having to actually look at the level itself.

Milwaukee Redstick Concrete Level Review - Picture

Frequently Asked Questions

Q.

What is a bullnose trowel?

A. A bullnose trowel is a smaller version of a regular trowel that has a rounded edge rather than a straight edge. They are typically used for smaller areas that need filling such as small tiles or grouting. They can be made out of a wide variety of materials with stainless steel being the most popular.

Q.

What is the best type of trowel to use?

A. This answer is going to differ from person to person based on what you are using it for and your own personal preferences. A lot of people prefer using wooden trowels simply because they are more lightweight and don’t cause as much fatigue when you are using it for extended periods of time.

Others prefer the durability that comes with using stainless steel trowels. It really just comes down to your own personal preferences and what you feel most comfortable using.

Q.

Are wooden trowels good for applying thinset?

A. Wooden trowels can be used for applying thinset but the wood tends to soak up a lot of the moisture and can cause the thinset to become dry before you’ve finished applying it. It is recommended that if you are using a wooden trowel for this that you apply a thin layer at a time and not more than that.

Q.

Are metal trowels safer to use than wooden ones?

A. While a metal trowel will typically be more rigid and provide more protection than a wooden one, it isn’t going to be impossible to break a metal trowel. If you are really going to go all out and try to break a trowel then you are probably going to just struggle doing it with your bare hands and need something like a hammer.

Q.

What is the best thickness for a trowel?

A. This is going to differ depending on what you are using the trowel for and personal preference. There is really no “best” here, it really comes down to what you feel most comfortable using and what you prefer. Thicker trowels typically offer more durability but are going to be a little heavier than the regular ones, while thinner trowels are typically lighter but aren’t going to be as durable.

Q.

Are laser level screeds more accurate than traditional ones?

A. Laser level screeds aren’t going to be more or less accurate than their traditional counterparts but they do have the advantage of being more convenient to use and store. With a traditional screed, you need to spend more time making sure that it is stored properly so that it isn’t going to get damaged and with the laser level screed, you won’t need to worry about that at all.

Q.

How do I use a level line?

A. A level line works by having two lines that are at a 90 degree angle from each other. Typically you will have one line on the side of your house and then run another line along where it meets the ground to make sure that everything is level.

Q.

What are some of the most important things to take into consideration when laying a fresh concrete driveway?

A. The most important thing is going to be making sure that your base is completely level and stable before you begin laying down the cement. Next, you are going to need to make sure that you give it enough time to cure properly before you start parking your car on it. It typically takes a good week for concrete to cure properly so try to not drive on it until then. Once it has cured, your driveway should last you a long time without any problems.

Q.

What are the different types of concrete I can use for my driveway?

A. You can use regular concrete, rapid-set concrete or pre-mixed bagged concrete. Each of these types are going to work well for your driveway but it really is just going to depend on your preference and what you are most comfortable using.

Q.

Are laser levels accurate?

A. While laser levels aren’t necessarily considered to be 100% accurate (nothing really is) they are still an improvement over traditional levels and they are more convenient to use as well. They typically aren’t going to be more than an inch or two off from level, if that, so as long as you are laying your bricks or stones in a straight line then it really shouldn’t make too much of a difference.

Q.

How can I tell if my concrete is ready to be walked on or driven on?

A. One of the easiest ways to test this is to grab a handful of the concrete and try to twist it. If it twists easily then it isn’t strong enough yet and needs more time to cure. Alternatively, you can also use a shovel to remove a small piece of it and hold it up towards your ear. If you hear a cricking sound then it isn’t strong enough yet. Typically, the concrete should be ready to be used after a week but this can vary depending on temperature, humidity and other factors.

Milwaukee Redstick Concrete Level Review - Picture

Q.

What is the best way to patch up a damaged driveway?

A. If your driveway is damaged in one specific area then the best thing that you can do is to remove all of the broken or cracked concrete from that area and then clean it thoroughly. Next, mix up some concrete to match your driveway and then pour it into the area that you have prepared. If the damage is more widespread than this, you might need to consult a professional as you may need a complete replacement rather than just a patch job. You can also opt to use asphalt for small repairs such as this.

Q.

What steps should I take to prepare my driveway for winter?

A. The most important part of preparing your driveway for winter is to clean it thoroughly. Get rid of all of the leaves, sticks, stones and any other debris that has gathered there over the summer as these can all act as ice breakers and could cause some serious problems for you when it starts freezing outside. A snow broom or blower can make this process a lot easier. Once you have done this, apply a thin layer of de-icer to those areas of your driveway that tend to ice over first (the part that you park your car on is a good place to start) and then do another quick cleanup to get the excess away. This will keep the salt that you will need to apply in order to keep your driveway safe from freezing where it needs to go and not all over the rest of your driveway.

Q.

What is the best way to get rid of water off my driveway?

A. If you don’t have too much water to clear and you don’t want to start going through the process of removing it with a shovel or broom, then simply pouring some salt across the top of it will help a lot in absorbing the water. This is a good short-term solution but don’t forget to clean up the salt afterwards.

Q.

How can I remove oil stains from my driveway?

A. Unfortunately, oil stains are one of the most difficult stains to remove from a concrete driveway. Commercial removers are available but even if you were able to get the stain out, it will very likely end up there again in the future due to the nature of how these kinds of stains work. The best thing you can really do is to prevent the oil from getting on your driveway in the first place. Cover the driveway with a carport or some other form of roof to prevent oil drips from getting on it. If you do get an oil stain on it, try to wipe it up as quickly as you can and then get to work on removing the stain before it has a chance to set in.

Q.

What is the best way to seal my driveway?

A. Get yourself a high quality sealing product and follow the instructions on the packaging. Don’t just buy some random product from your local hardware store as you will probably not get the results that you are looking for and it might even cause damage to your driveway.

Q.

How often should I seal my driveway?

A. It is recommended that you seal your driveway every year in order to keep it in good condition and to protect it from the elements. This should help to prevent cracks and other damage such as the discoloration that can happen over time due to sun exposure.

Q.

What do I need to seal my new driveway with?

A. You should be looking for a high quality sealant that is specifically designed for concrete surfaces, not a driveway sealant that is meant for asphalt or a floor sealant that you might find at your local hardware store. These products are not highly effective and can cause damage to your driveway over time.

Q.

Can I do the work myself or will I need to hire a professional?

A. It really depends on what your skillsets are. If you feel confident that you can handle this job yourself, then go right ahead. Just remember to take all safety precautions and wear all of the necessary safety gear. If you aren’t entirely sure that you will be able to do a good job and you aren’t comfortable working at heights, it might be best to hire a professional as it could save you a lot of headache (and possibly even money) in the long run.

Q.

How much is this going to cost me?

A. The actual cost of the driveway sealing itself will be the biggest factor in this. If you are hiring a professional, then the price will vary depending on where you live and how large your driveway is. This isn’t like painting your house where a cheaper labor rate in another city might entice you to have someone do the job for less. The amount it costs to actually seal the driveway is based strictly on size and the cost of materials.

Most sealcoats are not all that expensive if you were to buy the materials and do the job yourself. If you are hiring a professional and they don’t have a set price for the job, ask for an estimate so you will know what you’re dealing with. In most cases, this shouldn’t be an extremely expensive project and should be fairly reasonable.

When it comes time to reseal your driveway again, the cost will most likely be more than the first time due to the fact that the sealant will have to cover the entire surface of the driveway each year after that.

Q.

Should I seal my new concrete now or should I wait until it is fully cured before sealing it?

A. Concrete can take a very long time to cure, sometimes up to a year. It is best to wait until it has cured completely before sealing otherwise you run the risk of damaging the surface. Each sealant is different and will have different directions for how to apply the sealant so you will need to follow those. A good general guideline is to wait 7 days after it has been fully poured and is no longer soft or tacky before applying a sealant.

Milwaukee Redstick Concrete Level Review | realmanguide.net

Q.

How can I tell if my driveway needs to be resealed?

A. As a sealcoat is designed to do, it protects your driveway by soaking up the oils and other liquids that are constantly being spilled on it. Over time, the sealcoat will become saturated and no longer be able to soak up as much liquid. This could cause stains to form in high traffic areas where the sealcoat has become saturated to the point where it can’t soak up anymore liquid. Over time, this could cause permanent staining and damage.

If your sealcoat is old, has been damaged or stained in any way or if you aren’t sure when the last time it was sealed, it would be in your best interest to have it resealed. If it does need to be resealed, it’s best to do it as soon as possible as this will prevent potential damage from occurring and will extend the life of your driveway.

Q.

What’s the difference between a penetrating sealer and a surface sealer?

A. Penetrating sealers soak into the concrete to a certain degree to protect it. Surface sealers form a barrier on top of the concrete to protect it.

Penetrating sealers are most often recommended as they are more long lasting in most cases.

Q.

What tools will I need?

A. You will need some sort of sprayer to apply the sealant. A pump sprayer will work or you can also hire a company that uses a hose attached to a truck to do the spraying for you.

You will also need a squeegee or a mop to remove as much of the excess liquid as you can.

Q.

How long does it take to dry?

A. This will depend on the brand you are using and how warm the temperature is. Most manufacturers suggest that you don’t drive on it or park on it for 8 hours so plan accordingly.

You should also thoroughly clean the driveway first before applying the sealant to remove any debris, old coat of sealant or anything else that might be on there that could keep the new coat of sealant from adhering properly to the surface.

Q.

How long will it last?

A. This will depend on what type you get and how well you apply it. Most quality sealers should last 2-3 years. Cheaper brands may only last one year or even less. Follow the directions on the label for proper application for best results.

Q.

Can I apply a sealant over an old coat of sealant?

A. This will depend on the type of old sealant that is already on the surface. It also depends on what type of new sealant you are applying. For best results and longer life, we recommend removing any old sealant before applying a new one.

Q.

How do I remove old sealant?

A. Grinders and wire brushes work okay but can be messy and time consuming. Heat can also be used to remove sealant. We recommend using a propane torch which should easily and quickly remove the old sealant. Be sure to only do this on concrete as burning asphalt can cause it to catch on fire.

If you don’t want to remove the old sealant we recommend using a surface sealant rather than a penetrating sealer which would have to soak into the old sealant before it can properly protect the surface.

Q.

Where can I get more information on how to apply sealant?

A. Most manufacturers will have a website with detailed information and how to videos. You can also find information on the different types of sealers as well as videos on how to apply them at DrivewaySealcoating.net

Milwaukee Redstick Concrete Level Review at realmanguide.net

DrivewaySealcoating.net also has a forum where you can get answers to any questions you may have as well as info on local contractors who apply sealers in your area.

Sources & references used in this article: