Milwaukee Folding Miter Saw Stand Review
The Milwaukee folding miter saw stands are a popular choice among hobbyists and professionals alike because they’re easy to set up, require very little maintenance, and offer great stability. They’re not only convenient but also economical since they don’t need to be replaced every few years like some other types of workbenches do.
There’s no doubt that these foldable tables have their drawbacks though. They’re heavy, expensive, and take up a lot of space. If you want something that folds down into a compact size then there are better options out there such as the Kreg Jig Table or the Craftsman Workbench.
If you’re looking for something that will last longer than most others then it might be time to consider upgrading your equipment. There are several products available that will make your life easier and save you money over time. One of those options is the Milwaukee Folding Miter Saw Stand.
What Is A Foldable Table Saw Stand?
A folding table saw stand is basically a table saw stand designed so that it can be folded down into a smaller size when not in use. These work great for people who need a portable table but don’t have the storage space for a regular workbench. They’re easy to set up and take down.
A standard table saw stand is very heavy and takes up a considerable amount of space so that’s why these are also referred to as foldable table saw stands.
Another popular type of workbench is a Kreg Jig Workbench. These are great for people who do a lot of woodworking or DIY. They’re very durable and can hold up to a lot of wear and tear without showing any signs of weakness or breakage. They’re also very affordable and cost less than a quality table saw.
Foldable table saw stands weigh about the same as regular workbenches, probably even a little more. In order to make them as portable as possible they use lighter materials in their construction. This makes them less durable and more prone to breaking or malfunctioning over time.
The good thing is that they’re very easy to set up and take down so you won’t need any extra tools or assistance. In fact, you could probably teach yourself how to do it in less than five minutes. They’re not as easy to use as a regular workbench but this shouldn’t be an issue if you’re just doing some simple woodworking on the weekends or as a hobby.
How Are They Stored?
A foldable table saw stand is typically stored in two sections. The first thing you do is lay it down on the ground or floor and then pull the legs out until they lock into position. Next, you raise one side upward until the upper and lower sections are at a 90 degree angle with each other, then push the locking knob until it’s tight. This secures the leg into place. You do this on all four sides and then you have a sturdy table that’s ready to use.
What Are The Benefits Of Using A Folding Table Saw Stand?
The benefits of using a folding table saw stand instead of a regular workbench are plentiful. Not only are they easy to store but they’re also lightweight so you can carry them around your workshop with relative ease. They can be used as an extension to your workbench so you have more room to work.
If you’re like most people then you don’t have the luxury of having large workshop in your backyard so space is always at a premium. A foldable table saw stand will easily fit into your closet, against a wall, or in a corner. Once you’ve finished using it then you can just collapse it and lean it up against the wall until you need to use it again.
Are There Any Issues To Consider?
When it comes to issues or problems some people have complained that the locking knobs can be a bit stiff. If you’ve never used one of these stands before then this can be a bit frustrating at first. All you need to do is apply a little elbow grease and turn the knobs the opposite way you usually do when loosening them. After a couple of times you shouldn’t have any more problems.
Also, when you first receive your foldable table saw stand it might not feel very sturdy when you set it up. Some people have said that after extended use the legs have slowly started to spread out causing the table to become wobbly or uneven. This can be easily fixed by tightening up the locking knobs more often and making sure everything is nice and secure.
The Final Verdict
Considering how cheap foldable table saw stands are and all the extra benefits they have to offer it would be a shame not to buy one. Even if you already have a regular workbench in your workshop then a foldable table saw stand would still come in handy as an extension for certain jobs. They’re so easy to store and take up hardly any room at all.
One should also remember that you get what you pay for and if you decide to buy an expensive one thinking it will be of better quality you may be disappointed. It’s always best to stick with a brand name that has a reputation for making quality tools because there are many cheap knock offs out there that won’t last you very long.
If your main concern is space then a folding table saw stand is perfect for you. They also make great gifts for crafty friends and family members who do a lot of wood working or just like to tinker around with DIY projects from time to time.
Sources & references used in this article:
- Portable miter saws (F Fushiya, N Hakamata, H Abe, N Inoue – US Patent 4,638,700, 1987 – Google Patents)
- Combination table-miter saw safety system (JC Janson – US Patent 8,220,372, 2012 – Google Patents)
- Turntable mechanism for a cutting tool (RP Brault, JS Holly – US Patent 6,431,042, 2002 – Google Patents)
- Bevel angle adjustment mechanism for a compound miter saw (AL Itzov – US Patent 6,474,207, 2002 – Google Patents)
- Bevel angle adjustment mechanism for a compound miter saw (AL Itzov – US Patent 5,829,333, 1998 – Google Patents)
- Combination table-miter saw safety system (JC Janson – US Patent 8,485,078, 2013 – Google Patents)