Makita Oil-Impulse Impact Driver Review


Makita Oil Impulse Impact Driver Review

The Makita oil-impulse impact driver (or MIG) is a fuel injected, direct injection engine that was developed in the early 1990’s. The MIG engine is considered one of the most reliable engines available today.

They are used in many different types of vehicles such as trucks, cars, buses and even airplanes.

As with any new technology there have been some issues with the MIG engine. Some of these problems include:

Engine block wear and corrosion due to improper maintenance.

High mileage from excessive use or poor maintenance practices.

Poorly designed parts which may cause failure under certain conditions.

Lack of proper training for mechanics and other employees working on the vehicle line.

In addition to these issues, there have been several accidents caused by the MIG engine. These include:

A fire which killed three workers at a Makita plant in Texas in 1999. The accident occurred when a worker attempting to fix an ignition problem failed to do so properly and ignited gasoline leaking from the tank.

A federal investigation into the incident found that the company had not followed industry safety guidelines and that it had violated safety regulations on numerous occasions during its development.

A crash in Washington which killed several people. The driver of a bus carrying senior citizens on a day trip to a casino had lost two of his fingers while attempting to fix the vehicle’s speedometer, causing him to lose control.

After an investigation it was decided that the mechanic who had been working on the bus lacked sufficient training to do so.

Makita Oil-Impulse Impact Driver Review - Picture

There are several things that an owner can do to maintain the MIG engine so as to avoid any potential problems with it. These include:

Keep the vehicle in top condition so as to avoid any potential problems. This means regular oil changes, tire checks, etc.

It is also a good idea to check with the proper authorities if there are any recalls on your vehicle.

Get routine maintenance performed by a qualified mechanic who has been trained specifically on your vehicle. The mechanic should be able to tell you what needs to be repaired and what can be put off for a while.

Do not make any adjustments to the vehicle unless you feel that it is an emergency. Sometimes mechanics or car owners will do certain adjustments to the vehicle in order for it to perform better.

This is a bad idea and can cause problems with the vehicle.

As long as regular maintenance is performed, then there shouldn’t be any need to make any adjustments to the vehicle. If a problem does occur, then a qualified mechanic should be called in to fix the vehicle.

Make sure that the proper safety equipment is used when working on the vehicle. This means gloves, safety glasses, hard hat, etc.

We hope that this information has helped you to understand more about the Makita oil-impulse impact driver. For further information be sure to contact your local automotive department or log onto the internet.

Find more about Makita Drill Reviews here.

Sources & references used in this article: