Makita LCT203W 10.8-volt Combo Kit


Makita Cordless Tools Set: The Makita LCT203W 10.8V Combo Kit is a high quality tool set with features such as a precision ground blade, stainless steel handle, and a rubberized grip. It comes with two blades, one for each hand. The blade for right hand is 3/16″ thick and 1/4″ wide while the blade for left hand is 3/8″ thick and 1/2″ wide. These are both hardened to Rc 58-60 HRC. They have a sharpened edge for cutting and slicing. The blade is made from S35VN steel which is known for its strength and hardness. This type of steel is used in aircraft parts such as landing gear doors, wings, engines, propellers etc.. The handle is made from plastic and it feels comfortable in your hands even when holding the knife or scissors. The blade guard is made from aluminum and it protects the blades. There are four screws on the top of the case so you can attach it to your wall. You will need a screwdriver to remove these screws.

The Case: The case is made of plastic and it weighs around 5 pounds (2 kg). It measures 8 inches x 4 inches x 2 inches (20 cm x 12 cm x 6 cm) When closed, there are four lids.

Two of the lids open to reveal blades, one of the lids flips open to reveal the handle and the fourth lid contains a blade guard which can be attached to the bottom of the case. The “scissors” blade has a 1″ cutting edge while the “blade” has a 2-7/8″ cutting edge. Each blade is marked with text that tells you what it is for, for example, one blade reads “24T 14CUT 14PST” which means it is for cutting paper. The blades are thick, strong, and sharp. You will find this tool useful for a wide variety of jobs around the office or home.

Cleaning: The tool can be cleaned with either a soft cloth or mild detergent. After cleaning, make sure that all water has been dried off before storing the set away.

This is a professional grade cordless tool set with everything you need to get your job done.

Storing: The kit is easy to store. After use, you simply place the blades into the blade guard and place it in the bottom of the case.

You can then place the handle on top of the blades. Finally, screw the two lids onto the top of the case and your cordless tool set is ready to store. It takes up around the same amount of space as a roll of duct tape.

Safety: Make sure that you wear safety glasses when using this tool. The blades are extremely sharp and will cause serious injury if handled improperly.

Also, keep the blades out of reach of children and pets. If you or anyone else should accidentally come in contact with the blade, seek medical attention immediately.

Included Accessories: You get two blades with this tool kit, one for cutting paper and one for cutting more difficult materials such as wood. You also get a blade guard which will protect the blades when you are not using them.

There is no case for the blades so you will need to be careful that you do not lose any of these parts.

Makita LCT203W 10.8-volt Combo Kit - Image

The blades will fit on any 30mm power tools such as a drill or grinder. You can also use the power tool without the blades for more general applications.

See below for details about this handy cordless tool set.

This is a cordless, battery operated tool kit with two detachable blades. The blades can be used in a power tool or by hand for a range of different cutting jobs around the home or office.

This kit is great if you need to cut a wide range of materials and want to use the same tool for all of them. The design is not as compact as some of the other options here, so you may want to consider a different product if portability is important to you.

The kit includes two blades and a blade guard for safe storage when not in use. You will need to purchase batteries and a charger separately.

This cordless tool kit is perfect for cutting paper and cardboard.

Sources & references used in this article: