KREG 90 Degree Corner Clamp
The Kreg 90 degree corner clamp is one of the most popular types of clamps used today. They are available in many different sizes and shapes and they come in various materials such as steel, aluminum, plastic or even wood. The reason why these clamps have become so popular is because they provide excellent results at a low price. The main advantage of using a 90 degree clamp is that it allows you to hold your workpiece with less effort than if you were holding it with a straight edge.
What Is A Corner Clamp?
A corner clamp is simply a tool that holds your work piece while allowing you to make precise cuts. You can use them for any type of cutting task from making decorative pieces like jewelry, to working on metal parts, to making furniture. There are two basic types of clamps:
90 degree corners – These clamps allow you to cut around a curve without having to bend over. For example, when making a piece of jewelry, you would use a 90 degree corner clamp to make the shape of the earring.
Straight edges – When using straight edges, you must bend over and then push down hard on your workpiece before starting the next step. For example, when using a straight edge clamp for cutting out the shape of an earring, you would bend over and push down hard on your workpiece before starting the next step. This obviously involves a lot more effort and is not as precise as 90 degree corner clamps.
As you might expect, 90 degree corner clamps are the best option for anyone who wants to make precise cuts. If you are like most people, you will find that having both 90 degree corner clamps and straight edge clamps available gives you better results. So let’s take a look at some 90 degree corner clamps in more detail to see what they can do for you and how they can help with your work.
Why Do You Need A 90 Degree Corner Clamp?
There are a wide variety of jobs that require you to make curved cuts in wood or other materials. There are many different types of clamps that allow you to make these cuts. You can use a simple clamp like a spring clamp or you can use a specially designed clamp like 90 degree corner clamps to make curved cuts in your workpiece.
What Are The Advantages Of A 90 Degree Corner Clamp?
If you are making a lot of curved cuts in your workpiece then a 90 degree corner clamp is preferable. 90 degree corner clamps are very easy to use. You simply place your workpiece against the clamp and then tighten the screw so that it holds firmly in place.
You can make straight or curved cuts with a 90 degree corner clamp. This allows you to make very precise cuts without putting a lot of effort into it. 90 degree corner clamps are especially useful for making jewelry such as bracelets or necklaces.
How To Use A 90 Degree Corner Clamp?
Using a 90 degree corner clamp is very easy. The clamp consists of two pieces of metal, one that holds the workpiece in place and one that pushes against it. When you are ready to cut, place your workpiece against the holding piece and then tighten the screw with an adjustable wrench or another tool of your choice.
What Sorts Of Wood Can You Cut With A 90 Degree Corner Clamp?
You can use a 90 degree corner clamp to cut wood, plastic, metal and other materials. The clamp has two metal plates that hold your workpiece in place and a screw that you turn with an adjustable wrench or another tool of your choice. This allows you to cut through soft and hard woods as well as other materials.
What Else Can You Do With A 90 Degree Corner Clamp?
90 degree corner clamps are not just for making curved cuts in your workpiece. You can use 90 degree corner clamps to hold multiple pieces together as you saw, sand or drill them. This allows you to make multiple curved cuts at the same time which can save you a lot of time.
How Do You Keep The Workpiece Level?
It is very important that your workpiece remains as level as possible while you cut. If the workpiece is not level then it will not be a truly round shape which will affect the quality of your work. There are several ways to keep your workpiece as level as possible while you cut:
Put a spirit level on the top of the clamp before you tighten it down. This ensures that both sides of the clamp are at the exact same height and will help to ensure that your workpiece is perfectly level when you cut it.
Clamp your workpiece to a large board before you cut it. This ensures that the board will be as level as possible and will also stop the wood from breaking or splintering when you cut it.
Make sure that your saw is properly adjusted before you make the cut. Check that the blade is neither too high nor too low. Also, check that the blade is running at exactly 90 degrees to the base of the clamp. This will ensure that your cut is a clean and even as possible.
How Much Room Do You Need To Use A 90 Degree Corner Clamp?
You need to have at least 10 inches on either side of your clamp when you use it. You also need to make sure you have enough room above your clamp so that the workpiece doesn’t hit anything when you are making your cuts.
How Do You Grip The Workpiece?
You can grip the workpiece in a number of different ways. You can either hold it down with hand pressure, clamp it down with extra clamps or use magnets to attach it to the metal pieces of the clamp. It is important that you choose a way that works for you as this will allow you to make your cuts more easily and with less fatigue.
What Type Of Materials Can You Cut With A 90 Degree Corner Clamp?
With the right blade, a 90 degree corner clamp can cut through almost any material that you put under it. There are some materials that make cutting easier than others. For example, hardwoods and metal are more difficult to cut than softer woods or plastics. You should always make sure that you use the right type of blade for the job to ensure that you make your work as easy as possible.
What Sorts Of Blades Can You Use With A 90 Degree Corner Clamp?
You can use many different types of blades in a 90 degree corner clamp but the type of blade you use will depend on the material that you want to cut. For example, a general purpose bi-metal blade is ideal for cutting through wood and soft metals. This type of blade has a high speed and steel on the bottom half for cutting through harder materials. It also has a high carbon, low-alloy steel on the top for quick cutting. This type of blade is ideal for most jobs.
Can You Cut Angled Corners With A 90 Degree Corner Clamp?
Yes, you can. Angled corners are slightly more difficult to cut than a 90 degree corner but they are still fairly easy to cut. The angled corner clamp can be adjusted to any angle between 0 and 90 degrees. This allows you to cut angled corners with ease and without having to make complex jigs. The fact that it can cut corners of any angle also means that you can use it on a wide range of materials and projects.
What Size Blade Do You Need To Cut 1/2 Inch Plywood?
A 1/2 inch blade is one of the most common blade sizes for a 90 degree corner clamp. These blades are designed for general purpose cutting through wood and soft metals. They are suitable for cutting through most materials that you would use a clamp on. If you need to cut tougher materials, you may want to use a thicker blade.
Do You Need A Special Adapter To Cut Metal?
Most 90 degree corner clamps have a metal cutting adapter that you can use with a standard woodcutting blade. This allows you to cut through metal and other hard materials quickly and easily. If you don’t have an adapter, you can still use a thin metal cutting blade but you need to hold it in place with your hands. This isn’t very safe or convenient so make sure you check that your clamp comes with this adapter before you buy it.
What Type Of Material Is The 90 Degree Corner Clamp Made From?
The majority of these clamps are made from cast iron. This makes them durable and strong so that they last a long time. Cast iron also absorbs a lot of the pressure that is put on it while you are cutting. This means that you won’t experience as much vibration or movement when you are using it. Some manufacturers use a mix of different metals to enhance its durability and strength even more.
Do You Need A Special Stand To Store It On?
If you just have a small space available in your workshop, you may be wondering if you need a stand to store it on. This isn’t necessary; you can just lean the clamp up against a wall in your workshop. If you want to keep it more organised then you can buy a stand that is designed to hold multiple clamps in one location. This will also save you time when you are looking for the right clamp for the job.
What Is A Good First Clamp To Buy?
The Bessey FVJ9 Corner Clamp is a good first clamp to buy. It has many of the same features as more expensive clamps but at a much lower price. It has a strong steel frame with cast iron pads on the tips and base so that you can squeeze it tight without it damaging the material or moving around. The clamp can also be adjusted to any angle between 0 and 90 degrees which allows you to cut a wide variety of materials. It can cut through wood, plastic, and metal with ease. The clamp is still strong enough to cut through 1 inch thick timber. This clamp is an excellent choice if you want to try out a quality clamp without spending too much.
How Many Clamps Do You Need?
It really depends on how big your workshop is and what you want to use them for. A set of 4 clamps gives you more options when clamping different materials together. Having a few clamps that can cut through wood and metal means that you have a clamp for every occasion. You may want to start with a 1/2 inch clamp and then buy another one with a metal cutting blade so that you have everything covered.
What Is A Dowel Jig?
A dowel jig is a small accessory that you can use with many clamps to cut a hole in wood or metal so that you can insert a dowel. This allows you to make strong joints between different pieces of wood or metal. These jigs are fairly simple to use and they provide a really strong joint when done properly. If you are making furniture or anything else that has exposed wooden joints, these are an excellent addition to your workshop.
Sources & references used in this article:
- Pocket hole clamp (DP Banasik – US Patent App. 29/340,365, 2012 – Google Patents)
- Product catalog (CT Kit – burnstools.com)
- Clamp for joining work pieces (T Henze, DP Banasik – US Patent 8,807,549, 2014 – Google Patents)