Klein Ratcheting Lineman Wrench (KRW)
The Klein ratchet wrenches are used to tighten bolts or nuts on the inside of the engine block. They have a small flat head screwdriver at one end and a large Phillips head screwdriver at the other end. These tools are usually made from hardened steel with either stainless steel or aluminum handles. The handles may be plastic, but they must not rust.
These tools are often referred to as “ratcheting” because they can be tightened using both hands. However, these tools are not ratchets; they’re ratchet wrenches. A ratchet is a type of lever mechanism which allows a device to turn by turning another part of it. There’s no such thing as a ratchet wench on the market today!
Klein Ratcheting Lineman Wrenches: What Are They Used For?
A good question to ask yourself is why would I need a ratchet wrench? Why not just use a regular socket and extension cord instead? Well, there are several reasons. First of all, if you don’t have access to your car’s service manual, then you’ll probably need a tool like this one to get into the correct position. Meanwhile, regular sockets can’t be used on nuts and bolts located in the engine bay because they won’t fit in between the frame and the engine or transmission. A ratchet wrench can get into all those tight spots and turn the nuts so you can change your car’s oil or do other maintenance work.
These wrenches have specially designed heads that allow you to use a tool that’s shorter than a conventional socket and will still grab tightly onto a nut or bolt. These wrenches also have a ratcheting action that allows you to make quick work of stubborn bolts. You only need to turn the wrench a little bit and then ratchet it some more. The box end of the wrench is specially designed so the head will pivot out of the way when the wrench is turned in the opposite direction.
Klein Ratcheting Lineman Wrench: What Are They Made Of?
The best ratchet wrenches are made from chrome-vanadium-molybdenum alloy steel. This material is strong, durable, and rust-resistant. The ratchet head, screwdriver end, and the spring that powers it are usually made from heat-treated carbon steel. However, the rest of the wrench should be made with a stainless steel. This is especially important if you work on salt-water boats or live near the ocean. Otherwise, the salt air will cause your wrench to rust. Always wipe off any trace of moisture before you put your wrench away.
The handle is usually made from a composite material like reinforced plastic or fiberglass. This is a good thing because it won’t conduct heat or cold and it provides a nice grip even when your hands are greasy or oily.
Klein Ratcheting Lineman Wrench: What Sizes Do I Need?
Most ratchet wrenches come in two or three-inch lengths. The shorter wrenches are ideal for confined spaces. On the other hand, the longer ones give you more leverage and can remove even stubborn bolts. There are also wrenches with both a straight box end and a box end with an angle on one side. This design is perfect for working on cars and other vehicles.
How Do You Use a Ratchet Wrench?
Make sure the work area is well lit and free from any obstacles that might cause you to lose your footing. Loosen the nuts and bolts on all the wheel lugs by hand so that they don’t spin when you go to remove them with the wrench.
Apply a liberal amount of lubricating oil to the wrench head so it slides easily over the nut or bolt. Place the wrench on the head of the bolt, angle it until the wrench is pointing directly at the angle between the bolt and the hexagonal hole in the nut. Apply downward force to the handle with even pressure to avoid slipping.
Turn the wrench clockwise (as you’re looking at it) until you can’t turn it anymore. As you turn the wrench, it will ratchet and tighten the nut or bolt. Avoid using fast movements when you’re ratcheting to avoid slipping. When the bolt starts to move, remove the wrench in a quick motion.
Turn the wrench counterclockwise (as you’re looking at it) to loosen the nuts and bolts. Just keep reversing the procedure until all of them are removed.
Wrap It Up
A ratchet wrench is a handy tool to have around in most any job or task you might need to do. A good one can be used for everything from assembling furniture to changing out automobile tires. They’re very easy to use and will make jobs go much faster and more efficiently. You can pick one up at most any home improvement store. Just remember to always keep it clean and well-maintained so it will last a long time.
If you’re looking for a specific type of ratchet wrench then you might want to look at our other wrench guides. You’ll find all the top manufacturers right here.
Have any thoughts on ratchet wrenches or anything else to add?
Just let us know in the comments section below.
Thanks for reading!
Sources & references used in this article:
- Best Ratcheting Cable Cutter: Top 4 Picks of 2020 (E Mentor – 2017 – electricianmentor.com)
- Best Ratcheting Screwdriver: Top 6 of 2020 (E Mentor – 2017 – electricianmentor.com)
- Best RJ45 Crimper: Top 6 of 2020 (Ethernet Crimping) (E Mentor – 2017 – electricianmentor.com)
- Top 5 Best Linesman Pliers for Electricians (2020 Review) (E Mentor – 2018 – electricianmentor.com)