How to Touch a Spinning Saw Blade

How to Touch a Spinning Saw Blade

The Bosch Reaxx Table Saw is one of the most popular table saws in the market. It was first introduced in 1999 and it is manufactured by Bosch. It has been used by many professional woodworkers. They have installed several models of this table saw and they are very satisfied with its performance.

Bosch Reaxx Table Saw Review: Pros & Cons


It is very easy to use. You don’t need any special skills or experience to operate it. Its design makes it suitable for beginners and experts alike. It comes with a large base which allows you to stand up while using it.

This table saw has a simple yet effective mechanism that prevents the blade from spinning out of control when cutting through thin material such as paper, cardboard, etc.. The blade stops at the desired position after cutting. This table saw has a large handle that allows you to hold it comfortably even if your hands are big. There is no wobble when turning the blades and there is no risk of damaging the workpiece due to vibration. The blade guard protects your fingers from sharp metal edges. It comes with a dust cover so that dust does not accumulate inside the unit. It has a large aluminum table that allows you to place bigger workpieces on it. Its design makes the cutting process accurate and safe. You can also tilt the table for bevel and miter cuts.


It has no cons at this point in time.

More Details

This is a very durable saw which requires minimal maintenance. You should, however, clean it at regular intervals in order to prevent dust and debris from gathering. It is very accurate which means you will get the desired results each time your cut wood or any other material.

This table saw can be used for both home and commercial purposes. If you are looking for a saw that is durable, safe to use and accurate then this is the one for you. It has a very sleek design and it’s the best table saw in the market right now. It has proven its worth in various job sites and it can also prove its worth for you too.

What is the Best Blade to Use in a Bosch Reaxx Table Saw?

The Best blade to use in this table saw is the Diablo 40-tooth general purpose blade. It has a good size which allows it to cut smoothly, efficiently and quickly. It is not too small that its teeth are prone to breaking and not too big that it wastes a lot of materials and produces unnecessary sawdust.

What is the Best way to Maintain a Bosch Reaxx Table Saw?

The Best way to maintain this table saw is by cleaning it at regular intervals. You should clean the dust from its every nook and cranny. You should also oil the moving parts at regular intervals in order to make sure that it functions smoothly.

How to Use a Fence on a Table Saw

How to Touch a Spinning Saw Blade at

It is very important to know how to use a fence on a table saw since it can help you make accurate cuts every single time.

Things you will need:

Table saw


Protractor (optional)

Step 1: Set Up the Table Saw

Always set up your table saw according to the directions in your manual. If you do not have one, you can find one online or at your nearest hardware store.

Step 2: Align the Blade with the Fence

Your blade should always be aligned with the fence since this increases accuracy.

To do this, turn on your table saw then set the height of your blade. Next, lock it in place.

Now, using a ruler, align the ruler’s 0 point with the line that indicates the height of the blade then lock it in place. This should be very accurate.

Next, check if everything is aligned correctly by moving the fence to the left and right of the blade. If both the fence and the blade are aligned correctly, you will not be able to see any part of the blade when looking through the space between the fence and your table.

Step 3: Attach the Fence

How to Touch a Spinning Saw Blade on

To ensure that your fence is very secure, use a square to make sure that it is at a 90 degree angle to the blade. Then tighten all of its bolts to make it very secure.

Make sure that the fence is at a 90 degree angle to the blade. If it isn’t, you may end up with an inaccurate cut.

Step 4: Pick the Right Blade

Your blade size should be around 2-inches larger than the width of your workpiece. Make sure that the teeth are large and the blade is not too thin. Thinner blades are better for crosscutting and thicker blades are better for ripping. Also, blades with more teeth are better for softwood and blades with less teeth are better for hardwood.

To keep your cut safe, pick a blade that is the right size for your workpiece and won’t cause any kickback.

Step 5: Turn on the Power

Before you turn on the table saw, make sure that the blade is aligned with the fence.

Step 6: Make the Cut

Once everything is in place and you are sure that everything is aligned correctly, make your cut. Keep a finger away from the path of the blade. Never push your workpiece with your hands or any other body part. Also, never leave your table saw on without cutting anything.

How to Touch a Spinning Saw Blade - Image

This may cause damage to the motor and could even be dangerous.

Make sure that your workpiece is secured in place before you start cutting. You can use a push stick to help you make the cut or you can clamp it down.

Step 7: Make Accurate Cuts

Once you’ve made your cut, measure it to make sure that it is the size that you want it to be. If it is too big or too small, adjust your fence and try again.

You should also make sure that all of your cuts are accurate. To do this, draw a line that indicates the size that you want your cut to be then make sure that it measures up when you are done cutting. If the line is too big or too small, adjust your fence and cut again.

Step 8: Store Your Blade Safely

When you are done using your table saw, make sure that the blade is no longer spinning. Then, turn off the table saw and wait for the blade to stop moving before you touch it. Finally, store your blade in a safe place so that nobody gets hurt.

Step 9: Clean Up and Store

After you are done using your table saw, clean up any wood shavings that may be on the floor. Then, store your table saw until you need to use it again.

Step 10: Stay Safe

Whether you are using a table saw or any other power tool, always remember to stay safe. Most injuries could have been prevented if the user had followed basic safety procedures. These include:

Wear safety glasses and hearing protection whenever you are working on a power tool.

Make sure that your power tool is in good working condition before you try to use it.

How to Touch a Spinning Saw Blade - Image

Properly secure your workpiece before making a cut.

Keep your fingers away from the path of the blade. Never try to remove wood that is caught on the blade by hand.

Use clamps, a push stick, or even just your fingers to hold your workpiece down against the table. Never use your hands.

Make sure that your table saw is properly aligned before using it.

Make sure that all of the handles and switches are fully locked on before making a cut.

Never reach over a workpiece to attach it to the fence. Always climb under the table or move away from the saw and walk back around.

Keep your table saw in a well-ventilated area so that any sawdust that is created can easily be removed.

Apply blade oil to your blade before and after making cuts to keep it from getting too hot and to keep it running smoothly.

Make sure that there is nothing flammable anywhere near your table saw.

Don’t wear any loose clothing while using a table saw or any other power tool.

Store all power tools in a dry area where they cannot be touched or fall into any buckets of water.

Always turn off your power tool and wait for the blades to stop moving before you disassemble it for any reason.

How to Touch a Spinning Saw Blade -

Make sure that all of the handles and switches on your power tool are fully locked before using it.

Wear proper eye protection whenever you are using any power tool.

Never use a power tool while you are tired, in a hurry, or under the influence of drugs or alcohol.

Always shut off your power tools and wait for the blades to stop moving before you disassemble them for any reason.

Sources & references used in this article: