How to Replace Wood Window Trim with HardieTrim Boards

How to Install Hardie Trim Boards Around Windows With J-Channel?

The first thing that you need to do when replacing wood window trim with hardie trimmings is to remove all old wood paneling from around the windows. You will have to replace it with new hardie trim boards. You may use any type of material, but make sure that it is strong enough so that if something happens like a tree falling on them, they won’t break or crack. Also make sure that it doesn’t scratch your car.

You will have to drill holes through the old wood panels, which are going to be replaced with hardie trim boards. Make sure that the holes don’t go too deep into the wood because then you might damage your windows. You can use a nail gun or even a screw driver to drive these holes. If you want, you can put some screws in them instead of nails.

However, you must remember not to overdo it since you don’t want to damage the wood.

Once you have drilled out all the holes, you will have to glue the new hardie trim boards onto the existing wood panels. To do this, you will have to use a combination of epoxy and superglue. Epoxy is used for making joints stronger while superglue is used for creating a permanent bond between two materials. They both work extremely well when used together.

After gluing, you will have to clamp the new trim onto the old one. Use clamps or any other tool that can secure a bond between both of them. It may take up to 12 hours before the epoxy sets so that it is strong enough to stand on its own. You will have to make sure that you don’t forget about this process as it is very important.

If you wish, you may also hire a company that provides this service as well.

Once the epoxy has dried into a hard and strong bond, you will have to cut out the wood panel around the window. The first thing that you must do is to measure how deep the window goes using a tape measure. Make sure that it is as exact as possible to avoid problems later on. To cut the wood, you can use a handsaw or even a power tool if you have access to one.

Make sure that you are careful when sawing because it is easy to mess up and ruin your hard work.

After cutting out the wood around the window, you will have to sand away any rough edges so that they don’t damage anyone. You may also choose to stain or paint your hardie trim boards as well to make them look better and match your house. Keep in mind that when staining or painting, you must wait at least one week before installing your windows so that the paint or stain can set.

Installing the new window with hardie trim boards is easy enough. All you have to do is place some wood blocks on the inside of the window sill so that it won’t get damaged. From here, all you have to do is place the new window where the old one was and secure it into place using screws or nails. You will have to use a drill, screws or whatever tool you wish.

After you have installed your new windows, you will have to paint over them to hide the difference between the new wood window trim and the old wood siding. If you are using a dark stain on your window trim, you may want to use a lighter color on your siding to make them blend in. Keep in mind that this process may take several coats so plan accordingly.

Good luck and happy renovating!

How to Replace Wood Window Trim with HardieTrim Boards at

Insulating your attic can be a timely and expensive process that many homeowners decide is simply too much work. While this is certainly a reasonable conclusion, there are many benefits to insulating your attic beyond simply saving money on your energy bills. If you haven’t considered this project before, there are a few factors that you should take into consideration before making the final decision.

First and foremost, an insulated attic will keep your house cooler in the summer and warmer in the winter. Because your attic is empty and the sun’s rays have nothing to reflect off of or absorb into, the temperature of your attic can be up to 20 degrees hotter than the rest of your house. During the summer, this means that your house is likely to be hotter than normal even with the AC on, requiring you to turn up the air conditioning. During the winter this means that your house is going to be colder than normal, because all that cold from the outside is going to be sinking down into your house and concentrating in your attic.

Since warm air rises and cold air sinks, this means that the cold will be collecting in your attic as well, making it even colder in the rest of the house. Installing insulation will keep your attic cooler in the summer and warmer in the winter, because it prevents that cold or hot air from sinking down into your house. This will save you money on your energy bills all year round!

Another excellent reason to consider installing insulation in your attic is for safety reasons. If you have an unconditioned attic, there is always the possibility of pipes freezing and bursting, causing extensive water and water damage. If there is enough water damage, this can easily cause parts of your house to rot and decay. This, of course, will result in having to spend a lot of money to repair the damaged portions of your home.

By keeping your attic insulated, you can prevent all of these problems from occurring.

For those homeowners who may be on a tight budget, there are certain types of insulation that are cheaper than others. If you are looking to save money on your insulation project, you may want to consider using a spray-on foam insulation, which costs much less than fiberglass or cellulose. If you are looking to save as much money as possible, you may also want to consider installing rigid foam insulation as opposed to the more common spray foams.

Of course, there are drawbacks to using certain types of insulations. For example, the spray-on foam tends to have a shorter life span and can develop holes over time. Rigid foam insulation is also not quite as effective as fiberglass or cellulose, though it can still improve your home’s energy efficiency. If you are looking for an affordable solution, you might want to consider these factors when choosing your type of insulation.

If you are looking to improve your home’s energy efficiency, there is no reason why you shouldn’t consider insulating your attic. With the proper steps, you can easily increase the R-value of your home without spending too much money. If you are ready to get started on this project, contact a company like Rainbow International Inc. today!

Sources & references used in this article: