Circular Saw Guide: 45 Degrees And 90 Degrees
The best way to make straight cuts with a circular saw is to use the right angle guide. If you don’t have one, then you need to buy one. You may want to get a cheap one because it will save money over time. However, if you are looking for something better than the cheapest option, then there are some other options available which might suit your needs better.
One of them is the circular saw 45 degrees and 90 degrees jig. This tool allows you to make straight cuts with a circular saw. It helps you to cut the angles easily without any problems. The jig itself consists of two parts; one part is made out of wood and another part is made out of plastic or metal. Both parts are connected together using screws so that they won’t fall off during cutting.
If you are planning to use this circular saw 45 degrees and 90 degrees jig, then you need to follow these steps:
1) Place the saw blade at the center of the table.
Then place a piece of plywood (or any hard surface) behind it. Then screw the saw blade into its mounting hole. Now, turn on your power drill and start drilling holes in both pieces of wood. Make sure to drill at least four holes in each piece of wood.
2) Once you are done drilling, place the plastic part on top of the wooden part.
The plastic part should have more than four holes on each side of it. Then, place screws into these holes in a diagonal manner so that they will hold the two parts together.
3) After assembling both parts, place the circular saw guide onto your workpiece and then secure it on the edge using clamps.
Once this is done, you can start cutting the desired angle using your circular saw without any problems.
This circular saw guide is very easy to use and store as well. You just have to place it on top of your workpiece and then clamp it down using clamps. If you are cutting a small piece of wood then hand clamps will work just fine. However, if you are cutting large pieces then you will need to use a clamping rail as well. Then, you can also secure the jig on the edge of your table so that it won’t move or shift while you are cutting.
Making straight cuts with a circular saw is very easy with this circular saw guide. You don’t have to worry about making mistakes or errors because this tool will allow you to make cuts within 0.5 degrees of accuracy. Using this guide, you can cut at different angles as well such as 22.5 degrees, 45 degrees, 67.5 degrees and 90 degrees.
All you have to do is adjust the plastic guide to match the required angle and then lock it in position using the clamps.
If you are looking for something that offers more flexibility than a circular saw guide, then you can go with a guide rail. These guides are designed to help you make accurate straight cuts with your circular saw. They are quite easy to use and store as well. You can easily adjust the height and length of these guide rails to suit your needs.
Most of these guide rails are made out of aluminum and stainless steel which makes them very durable and long lasting. They also have integrated wheels on each end so that you can easily move them from one place to another. The only maintenance that you may have to do is apply a coat of paint over them from time to time so that they don’t get rusted.
If you are looking for the best circular saw guide rails, then you should definitely consider the Blitz MDTS109. This guide can make straight cuts of up to 48 inches in length with great ease. It works very well with most heavy-duty and professional circular saws. It has adjustable stops so that you can set the depth and length of your cuts very easily.
It is made out of heavy-duty aluminum and stainless steel which makes it quite durable and long lasting. You can also easily adjust its height as well as the length of the guide rail. The integrated wheels at both ends make it very easy to transport from one place to another.
Another great guide rail that you can use is the DEWALT DW745. This guide has an integrated measuring scale on it so that you can easily mark your cut lines. It is very easy to set up and can make straight cuts up to 48 inches in length. The guide rail is very durable as it is made out of aluminum and stainless steel.
It comes with integrated wheels at both ends which allow you to easily shift it from one place to another. It has integrated clamping brackets as well so that you can easily clamp it down on your work surface without any problems.
In addition to these two circular saw guide rails, you can also go for the DEWALT DW745. This guide comes with a strong magnetic edge finder which allows you to easily and quickly find the edge of your workpiece. It is very easy to use and allows for accurate cuts every single time. It is quite easy to set up as well and can make cuts up to 48 inches in length.
In addition to these two types of guides, you can also go for a guide that comes with a laser beam. These laser guides project a red laser beam onto your workpiece which allows you to make accurate cuts with your circular saw. These laser guides are very easy to use and allow you to make straight, smooth and accurate cuts with your circular saw.
However, even the best laser guide may not necessarily work for you if your eyes are not as good as they used to be. If this is the case, then you should go for a guide with an edge finder instead.
If you are in the market for a circular saw guide, you will definitely find a lot of different types and models on the market. They vary greatly in terms of design, features and price. If you have never bought one before, it can get really confusing really fast. Here are a few things that you should keep in mind before you buy one:
Size of Your Work Area
The size of your work area will determine the length of the guide rail that you will need. If you have plenty of room to move around while you work, and if your work pieces are not very long, then a shorter guide is all that you will need. However, if you are cramped for space or your work pieces are long, then you should get a longer one.
Type of Guide Rails
The main types of guide rails that you will commonly find are the straight and folding types. The straight type is exactly as the name suggests. It is essentially a long, straight piece of metal that can be clamped to a table. The folding type looks a bit like an accordion. It is a long metal strip that can be folded and unfolded so that it can be clamped to a table or other surface.
While both of these types work well, the accordion guide offers a major advantage in that it does not require you to clamp it down. If you are working on a surface that is not as sturdy as you would like it to be, then this is definitely the type of guide that you should get.
The Best Circular Saws You Can Buy
So, now that you know what to look for in a circular saw guide, let’s take a look at some of the best models that are available on the market right now:
GEFU Stainless Steel turning blade and rail A quality product from a brand known for making good kitchen equipment. $129.95 USD
The first product that we will look at is the GEFU Stainless Steel turning blade and rail. As the name suggests, this product comes with both a turning blade and circular saw guide rail. It also has a clamp that attaches to your table so that the guide rail does not move at all while you are cutting.
It is made entirely of stainless steel and features solid plastic wheels so that you can easily move it around your work area. This product is well-made and does exactly what it is supposed to do. It has a clamp that secures the guide rail to your surface, allowing you to cut pieces with precision and accuracy.
It also comes with a turning blade which is specially designed to cut through long pieces of wood without causing undue wear and tear to the teeth. The blade can be easily attached or detached from the guide rail.
All in all, this is a high quality product that should serve you well for many years. It is a little on the expensive side, but if you are looking for a really high quality circular saw guide then this one is definitely worth considering.
DEWALT DW761K Heavy-Duty Laser Guided Rip Fence An affordable circular saw guide with laser guidance. $199.00 USD
The DEWALT DW761K Heavy-Duty Laser Guided Rip Fence is another high quality circular saw guide that is definitely worth your consideration. It is made entirely out of metal and features a large rip fence on the top to keep your cuts as straight as possible.
It features a laser sight so that you can make accurate cuts every single time. This feature is great for making picture frame edges and other types of joints. It is an incredibly useful feature that you will get a lot of use out of.
This guide also has large rubber wheels so that you can easily move it around your work surface. It clamps on to your table and works with any standard circular saw. All in all, this is a great guide and well worth the price.
The DEWALT has many features that make it ideal for a wide variety of jobs. The only downside is that it can be a little bit difficult to clamp to your work surface due to its weight.
Still, if you are looking for a high quality circular saw guide with laser guidance then this product is definitely worth your time and money.
A circular saw guide is a great tool to have if you do a lot of woodworking and need to make straight cuts with your saw. Using one of these can help you make cuts that are up to 32 times faster than if you were doing it freehand!
Take a look at the top rated models above and find the one that suits your needs and budget. Whether you are a hobbyist or a professional woodworker, one of these tools will serve you well.
Sources & references used in this article:
- Miter attachment (R Chappell – US Patent 4,079,648, 1978 – Google Patents)
- Motor pack for circular saw (LC Brickner Jr – US Patent 4,694,721, 1987 – Google Patents)
- Guide for a motorized circular handsaw (CA Pennington – US Patent 4,065,114, 1977 – Google Patents)
- Miter box for portable circular saw (R Blanchette – US Patent 4,920,845, 1990 – Google Patents)
- Method and apparatus for forming cuts in catheters, guidewires, and the like (SC Jacobsen, C Davis – US Patent 6,014,919, 2000 – Google Patents)
- B018 Evaluation of Machining Characteristics on CFRP Straight-Line Cutting Using Flexible Circular Saw (Y YAMADA, N OSUMI, K HATAKEYAMA… – … on Leading Edge …, 2013 – jstage.jst.go.jp)