Hitachi NT50AE2 18 Gauge Finish Nailer Review


Hitachi NT50AE2 18 Gauge Finish Nailer Review

The Hitachi NT50AE2 18 gauge finish nailer is a high quality mechanical nailer with a wide range of applications. The machine gun version is equipped with a large hammer, which makes it ideal for use in combat situations where speed and accuracy are required.

The machine pistol version uses the same design but features an improved trigger mechanism to increase reliability.

In addition to its many other applications, the nailer is used in construction, mining, landscaping and many other industries. The nailer is available in various finishes such as chrome plating or black oxide coating.

The nailers are very popular among hobbyists due to their low cost and ease of maintenance. They have been around since the 1950’s when they were first introduced into military service.

Nails are manufactured from either steel, aluminum or copper. Steel nails are used for most types of household and industrial purposes while aluminum nails are commonly found in automotive and machinery applications.

Copper nails are used primarily for outdoor work like building fences, paving driveways and so forth. The nailer is powered by a motor or hand crank. Most models use a compressed air power source, which eliminates the need for fuel or battery replacements.

The price of these nailers range from as low as $ 35 to as much as $ 1,800 for the higher end professional models. Because they are high quality tools and built to last, most professionals keep and hand them down from one generation to the next.

Many people who get into woodwork, construction or other similar hobbies buy one of these tools because of their versatility and reliability.

The nailer is popular in the building trade because it can sink nails up to 60 times per minute. This makes it quicker than a traditional hammer and nail even though you have to reload the gun after every shot.

The nailer can be used for several different functions on the job site. It can be used for framing, sheathing, baseboarding, molding, door and window casing and so forth. Because the tool is so versatile, many tradesmen buy one even if they only use it occasionally on certain jobs.

The original nailer was developed in 18th century England. The earliest version of the battery was invented by a man named Sylvester Roper in 1818.

It had a crude design and was very heavy and cumbersome to use. It was so heavy that it had to be bolted to the floor. It took a long time for inventors to come up with a portable battery-powered device.

The original air compressor was introduced by a man named Roots in 1845. His design consisted of an air pump driven by the power of horses.

Hitachi NT50AE2 18 Gauge Finish Nailer Review - Picture

Later on, other inventors designed models that were powered by diesel and gasoline engines. The invention of these machines paved the way for the creation of the modern nail gun.

The first air powered nail gun was invented by a person named John Henry Kennedy in 1899. The original version of this tool weighed 55 pounds and could only shoot 30 nails per minute.

It wasn’t until 1921 when a man named James Henry started manufacturing an improved model that was lighter and more efficient. His model shot 400 nails per minute.

Types of Nailers

Framing Nailer

This is the most basic and heavy duty type. It’s generally used for building homes, sheds and other heavy duty construction projects.

The framing nailer contains a cylinder that holds between 50-100 nails depending on the size of the gun. There are several different models with various features. The most common types use plastic or paper collated nails while the more professional types use metal collated nails.

Roofing Nailer

The roofing nailer is specifically designed to shoot nails that are widely spaced at close range. The tool is primarily used in the construction of roofs and rafters.

Hitachi NT50AE2 18 Gauge Finish Nailer Review - Picture

The tool is designed to sink nails without going all the way through the roof so that it doesn’t cause a leak. It uses a plastic or paper collated system and can hold between 35-100 nails per load depending on the size of the gun.

Flooring Nailer

The flooring nailer is a type of nail gun that is used for putting finishing touches on wood floors. It can shoot between 20-110 nails per load but has to be reloaded frequently.

The tool uses a plastic collated system and does not shoot nails all the way into the wood.

Stapler

The stapler uses a short metal strip that contains between 16-50 staples at a time. The stapler is used for light construction work, furniture assembly, picture framing and general woodwork.

Some models have a safety feature that locks the trigger until the head is pressed down.

Framing Stapler

The framing stapler is a heavy duty tool that has a larger staple capacity than your regular stapler. It’s normally used for building decks and work that requires more holding power than a normal stapler can provide.

Brad Nailer

Hitachi NT50AE2 18 Gauge Finish Nailer Review - Picture

The brad nailer uses a small nail that is commonly referred to as a brad. This tool is normally used for light trim and molding work and cabinet assembly.

Pin Nailer

The pin nailer is designed to shoot small finish nails that are commonly referred to as pins. This tool is normally used for assembling window and door casings, picture framing and other fine woodworking projects.

Roofing Nailer

From the name you can tell that this tool is specifically designed for use on roofs. It uses nails with wide heads that are widely spaced so that they won’t go all the way through the roof if they’re shot at an angle.

Framing Nailer

As you might guess, this nail gun is designed for use on framing projects. It uses large nails that are generally between 1-3 inches long.

This tool is generally too heavy duty for most homeowners and is mainly used by professionals.

Handi Nailer

The last type of nailer we’ll go over in this guide is the handi nailer. This tool has a slim profile so that you can get into tighter spaces.

It’s generally used for stapling lightweight materials like plastic, drywall, roofing and vinyl.

The Bottom Line

Hitachi NT50AE2 18 Gauge Finish Nailer Review at realmanguide.net

There you have it, a guide to the various types of nail guns. As you can see there are several types with different uses and purposes so you should be able to find the right one to fit your particular needs.

Just remember that the heavier duty nail guns are generally for professionals and not for homeowners.

Many people have found our website trying to learn more about construction and home repair, if this is you, you will find our how to section to be very useful. There you will find guides on how to repair drywall, install flooring, replace windows, install door locks and so much more.

For those of you that aren’t really into the DIY thing, check out your local hardware store to see if they offer maintenance and repair services. This is a great money saving option because often times a simple fix like adjusting the hinges on a door or mounting a TV on the wall can cost 50 bucks or more at a repair shop.

However, with a little knowledge and persistence you can usually save yourself some big money.

Sources & references used in this article: