Greenlee Gator Insulated 18V Hydraulic Cutting and Crimping Tools


Greenlee Cat 6 Cable Cables:

Greenlee Cat 6 cables are used for high speed data transmission over long distances. They are available in different lengths and types.

These cables have special connectors called “greenlees” which allow them to be attached to equipment without having to cut or splice wires. Greenlee cable is made from twisted strands of copper wire wrapped around a core of aluminum alloy. It is very strong and resistant to corrosion. A greenlee cable consists of three main components: the inner jacket, the outer jacket, and the core. The inner jacket protects the core from damage caused by shock waves generated during operation; it also provides insulation between the two jackets. The outer jacket contains conductors (cable) that carry electrical current through the cable to power equipment connected to it. The core is where most of the work happens. It contains insulated conductors that carry current from one end of the cable to another. The core is usually made up of several layers of insulating material such as plastic, metal, or glass. Greenlee Cat 6 cables come in many different lengths and types including RG58A/U, RG59A/U, RG316L/U, RG323L/U, RG34D/U and other varieties. These cables are used in many different applications such as home theaters, security systems, and networking.

Greenlee Crimper:

The greenlee crimper is used for creating crimps in the ends of greenlee cables. There are two types of crimpers: ratcheting and non-ratcheting.

The ratcheting crimper has a mechanism that allows for uniform, easy crimps on each type of connector without having to remove and reset the die every time like with a non-ratcheting crimper. Greenlee crimpers are available in a wide range of models and sizes to accommodate many different types and sizes of connectors and cables.

Greenlee Gator 18V Hydraulic Cutting and Crimping Tools:

The gator 18V is a fully integrated, automated cable prep tool that provides an end-to-end solution for your network prep needs. The gator is designed to streamline field operations, increase productivity, and improve the quality of your network installation or service calls.

The Gator uses a 18V lithium battery to provide up to four hours of runtime. Its small size and weight make it easy to hold in one hand while crimping, cutting, and snapping cable with the other hand. The Gator is designed for multiple users: the quick release vise jaw mechanism allows you to change the tool bit in seconds. This enables each member of your team to customize their gator to the type of crimp jobs they work with most often. The Gator’s fully integrated design allows you to work faster, with less down time than with traditional ratchet style crimpers. The Gator is also compatible with all of greenlee’s interchangeable tool bits, so it can be used for a large range of applications.

Greenlee TRJ-601 Ratcheting Terminal Removal Tool:

The greenlee TRJ-601 ratcheting terminal removal tool is designed to remove stubborn wires from Termin shielded and other connectors without damaging the connector bodies or pin shells. The jaw size of this tool is 5mm.

Greenlee Gator Insulated 18V Hydraulic Cutting and Crimping Tools from our website

This tool is also known as the greenlee 5mm terminal removal tool.

Greenlee Crimping Tools:

Greenlee has a wide range of crimping tools available. These tools are available in different sizes to accommodate a wide range of connectors.

The most popular of these tools are the ratcheting crimping tools. These tools use a ratcheting mechanism to make consistent crimps every time without having to reset the die every time like with traditional non-ratcheting crimpers.

Greenlee Crimp Tools:

Greenlee crimp tools are used to create the initial interconnection between network cables and connector bodies. The most popular types of these tools are the greenlee center-bending crimping tools and the greenlee cable-squeezing cutting tools.

These tools are used for different types of connectors and applications.

These crimping tools are used for creating the initial interconnection between network cables and connector bodies. These tools can also be used with other types of wire and cable.

Greenlee Stripping Tools:

Greenlee stripping tools are used to remove the outer covering of wires without damaging the inner conductor. These tools come in a variety of designs and sizes to accommodate a wide range of wire sizes and insulation types.

Greenlee Gator Insulated 18V Hydraulic Cutting and Crimping Tools at realmanguide.net

These tools are designed to be quick and easy to use, without compromising on quality. They’re available in manual, pneumatic, and electric models.

Greenlee PunchDown Tools:

The greenlee punch-down tools are designed for terminating wires in punch-down blocks. These tools use a sharp stainless steel blade to make the initial cuts in the wire’s insulation, and then the plastic teeth cut through the rest of the insulation.

These tools are also available with optical fiber cable cutting blades.

Greenlee Wire Tension Tools:

The tension tools are designed to assist you in pulling wires through conduit and cable trays. These tools are available in both manual and pneumatic models.

Greenlee also offers a tension tool specifically designed for pulling optical fiber cables.

Greenlee Crimping and Cutting Tools:

These tools are designed to crimp and cut a range of different connectors with one tool. These tools can cut from the backside, and they leave a smooth finish that is ready for immediate crimping without any need for trimming.

These tools are available with a ratcheting action for the most popular and most used sizes of connectors.

Greenlee Stripping and Cutting Tools:

These tools are designed to remove several different types of materials from wires and cables, including things like PVC insulation, rubber insulation, and other types of coatings or jackets. These tools are available in both manual and pneumatic models, with several different interchangeable heads.

Greenlee Gator Insulated 18V Hydraulic Cutting and Crimping Tools | realmanguide.net

These heads can be changed out to suit a wide range of different wire gauges and insulation types.

Greenlee Cable Bending Tools:

The greenlee cable bending tools are designed to create tight radius bends in a wide range of sizes and materials, without kinking or damaging the cable. These tools are available with several different dies that allow you to make bends of different sizes for whatever your requirements may be.

Greenlee Pipe Bending Tools:

The greenlee pipe bending tools are designed to make both 90-degree and 180-degree radius bends in a wide range of pipe materials, without kinking or damaging the pipe. These tools are available with several different dies that allow you to make the perfect bend for whatever your requirements may be.

Greenlee Industrial Tools:

The greenlee industrial tools are designed to extend the capabilities of your punch-down tool to accommodate larger wire sizes. You can choose from several different jaw options that will allow you to cut or crimp bigger wire sizes.

Greenlee Wire and Cable Management:

The greenlee wire and cable management tools are designed to hold, organize, and easily locate your tools when they’re not in use. This line of products can help you keep track of all the tools in your kit, and provide a tidy work space so that you spend more time working and less time looking for tools.

Greenlee Ancillary Tools:

The greenlee ancillary tools are designed to assist you in a wide range of different tasks, from stripping wire and cutting cable to bending metal and more.

Greenlee Stripping Tools:The greenlee stripping tools are designed to make precise cuts in hard wire and cable insulation in a quick and easy manner. These tools can save you time on the job, and cut down on worker fatigue by making those tough cuts effortless.

Greenlee External Crimping Tools:

Greenlee Gator Insulated 18V Hydraulic Cutting and Crimping Tools at realmanguide.net

The greenlee external crimping tools are designed to provide a different style of crimp for your connectors. These tools rely on an outer molding process that provide more metal-on-metal contact for a more durable crimp.

Greenlee Internal Crimping Tools:

The greenlee internal crimping tools are designed to provide a different style of crimp for your connectors.

Sources & references used in this article: