Dremel 4000 Drywall Rotary Cutting Tool Kit Review: Features & Specifications
The Dremel 4000 is a rotary cutting tool which was developed by Dremel. It is designed to cut drywall or plasterboard up to 1/4 inch thick.
The machine comes with four different attachments. These include a screwdriver attachment, a nail gun attachment, a drill attachment and an angle grinder attachment. The unit weighs approximately 3 pounds.
The Dremel 4000 features a power supply and battery pack which are both included in the package. The unit runs on two AA batteries (not included).
There is no need to purchase additional power supplies since it uses standard wall outlets. When using the Dremel 4000, you will have access to all of its functions through a small panel located at the front of the machine.
There are three settings available when using the Dremel 4000: one for the main unit, another for the attachments and a third setting for the control panel. You can select between various speeds depending upon your needs.
The speed range ranges from 0 to 60 RPM. The Dremel 4000 also features a stop button located at the bottom of its body along with a reset switch located near its top edge. A red LED light indicates if there is any problem while operating the machine.
The Dremel 4000 comes with a range of attachments and accessories which give you the ability to work on a wide range of home improvement projects. The kit includes a drywall cutting attachment, a sanding disk attachment, a scraper attachment, a grinding stone attachment, a cut-off wheel attachment, a drill bit and a screwdriver tip.
PROS: The Dremel 4000 is ideal for cutting drywall, plywood and other types of hard materials. Its collection of attachments allow you to use it for sanding, grinding, cutting and more.
It may be a small tool but it is powerful enough to slice through cement and brick.
CONS: The Dremel 4000 is not very practical when working in tight areas since you have to continually bend over while using it. This tool is not cordless so you need to make sure that you are within reach of an electrical outlet in order to use it.
The machine also tends to get extremely hot as you work with it.
Sources & references used in this article:
- A BROKEN LEG STARTED IT ALL (O SAWS – search.informit.com.au)
- Implementation of an agriculture woodshop class in the Agriculture Department at Tokay High School (KR Yates – 2016 – csuchico-dspace.calstate.edu)
- Design and Development of a Novel Expanding Pedicle Screw for Use in the Osteoporotic Lumbar Spine (P Rasoulinejad – 2013 – ir.lib.uwo.ca)