Best 18V Cordless Reciprocating Saw Head To Head Review: DeWALT VS DRILLISK?
DeWALT vs Drilliske Kommando (DRI)
The two most popular models are the DRI and the DEWALT. Both have their pros and cons. The main difference between them is price, which makes one better than another for certain tasks.
For example, the DRI is cheaper but not as powerful.
In general, if you need a tool that will cut through wood or plastic easily and quickly, then the DEWALT would be your best choice. If you want something that will do some minor cutting work without breaking into pieces like a chainsaw, then the DRI might be what you’re looking for. You’ll probably notice that both tools are made from metal and they weigh quite a bit too!
If you don’t mind spending a little extra money, then the DRI is definitely worth it. However, if you just need a cheap tool to get the job done, then the DEWALT might be your best bet.
Why Buy A Cordless Reciprocating Saw When You Can Use One Of These Two?
Both of these tools are good at what they do and will work well for most jobs. However, one problem you might face is the cord. It can be really annoying when you’re working in a tight space and your cord gets in your way or it gets damaged. That’s where cordless tools like these come in handy!
The other thing is that they’re both very heavy tools. To be honest, after using one of these for a couple hours, your arm will probably start to feel quite fatigued. This is where cordless reciprocating saws really shine since you won’t have to worry about getting a sore arm.
Best 18V Cordless Reciprocating Saw Head-to-Head Review: DRI VS DEWALT
The DEWALT is the more powerful of the two reciprocating saws. It uses a brushless motor to provide its power and has a no-load speed of up to 5,000 strokes per minute. Because of this, it is more than capable of cutting through wood, plastic, and even some types of metal.
The DRI reciprocating saw is a little less powerful. It uses a brushed motor to operate it, which while not as good as the DEWALT’s brushless motor (this also helps keep the price down), it provides more than enough power for your basic cutting needs. It’s no-load speed is around 4,000 strokes per minute.
Both tools are very reliable. There really isn’t any need to worry about them breaking down on you in the middle of a job. With proper maintenance and care, they should last for many years.
The only possible issue you might face is with the battery dying. Because these are cordless tools, the battery will eventually run out and you’ll have to replace it to keep working.
This is more of a problem with the DRI since it only comes with one battery. The DEWALT comes with two batteries, so if you get a spare you can always have one charging while using the other. That way you’ll almost always be able to work without any down time.
The DEWALT is much lighter than the DRI at only 5.5 lbs. This makes it much easier to use for extended periods of time.
You won’t get as tired holding and operating it. It also has larger rubberized handles that provide a better grip so you won’t have to worry about it slipping out of your hands.
The DRI is quite a bit heavier at 9 lbs. In fact, it’s actually heavier than some smaller gasoline powered saws! Because of this, it can be somewhat tiring to use for extended periods of time.
It does have rubberized handles too though, so you can get a good grip on it.
Here’s where the DRI has a big advantage over the DEWALT. Since it uses a brushed motor instead of a brushless, the manufacturers were able to cut costs in other places to be able to sell it at a lower price. The DRI costs about half as much as the DEWALT.
However, if you want to get the most out of your money, it might be a good idea to get the brushless DEWALT DCS387B. It costs a little bit more than the regular model but its performance is much better and it comes with 2 batteries so you’ll almost always have one ready to go, plus you won’t have to worry about the battery dying in the middle of a job.
Which One Should You Get?
If you have the money, go with the DEWALT DCS387B. It’s going to be a better saw all around and you’ll get more use out of it for the long haul. Unless you cut a lot of thick material or use it very often, one battery is all you’ll ever need since the included one charges in 40 minutes.
If you want to save some money, get the DRI reciprocating saw. It’s definitely not a bad saw and for the price, it can’t be beat. Just plan on getting a second battery so you’ll always have one ready to go.
Which would you rather have?
Share your thoughts in the comment section below! If you found this article useful please share it with other people who might also find it interesting.
Sources & references used in this article: