Allied Tools Pro-Grade Impact Sockets Review


The most popular type of impact socket are those used for automotive applications. They are usually made from steel or aluminum alloy with a hardened steel core and an outer layer of plastic. These types of sockets have been designed to withstand high forces applied over extended periods of time without breaking down.

A common misconception among consumers is that these types of sockets will not work properly if they come into contact with water or other liquids such as oil, gasoline, brake fluid etc..

However, these types of sockets do not require special care when using them with fluids.

When it comes to household appliances like washing machines, dishwashers and refrigerators, there are some additional precautions that need to be taken because they may contain liquid components which could cause damage to the socket if dropped onto the floor or spilled on it. Also, these types of household appliances can produce dangerous levels of heat during operation due to their design.

If you’re looking for a reliable and durable way to connect your electrical appliance to the wall outlet, then you’ll want to consider an impact socket.

An impact socket is a device that uses compressed air (or other gas) instead of electricity to generate static electricity. Static electricity can be very dangerous if it builds up around the connection point, but fortunately it’s extremely difficult for anyone except a trained electrician to accidentally short out your home’s power supply.

How do impact sockets work?

Impact sockets are similar to a regular socket except that they have a metal pole that sticks out of the side. The pole has a rubberized coating to make it easier to grip and is connected to a tank of compressed air via a hose.

The impact socket allows you to easily detach and reattach an appliance’s power cord by pushing the pole against the appliance’s outlet several times in rapid succession.

Why should you use one?

There are several advantages to using an impact socket rather than a traditional electrical socket:

The exterior of the power cord doesn’t get hot at all – most impact sockets have special insulation built into their poles to prevent this from happening.

You can easily reattach the plug by pushing it back into the outlet.

At under $20, they’re extremely cheap to purchase and offer excellent value for money.

There are a few disadvantages to using an impact socket, and these mainly center around the noise that it makes when you use it. Most people can get used to this after repeatedly using the tool, but it’s something to keep in mind if you need to work in a quiet location.

Are there any safety concerns?

Impact sockets are specifically designed to prevent you from shorting out the power cord.

However, there are a few safety concerns you should be aware of if you’re going to be working on an appliance that’s currently plugged in:

Don’t stand in water or on a wet surface when using an impact socket.

Allied Tools Pro-Grade Impact Sockets Review - Picture

Don’t use an impact socket inside a vehicle – if the power cord shorts out, it could trigger an electrical explosion.

Always wear rubber-soled shoes when using an impact socket.

Only use an impact socket on devices that are turned off or unplugged.

These safety concerns are small enough to be completely out-weighed by the time and energy you’ll save when using one of these devices.

What types of impact sockets are available?

You can easily buy an impact socket online or from a hardware store without having to worry about compatibility issues since all of them are compatible with all power cords.

The main differences between each type of impact socket lies in the length of the pole and the strength of the compressed air cartridge. Some sockets have longer poles than others, which means that you’ll have more reach while detaching or reattaching a device’s power cord.

Sources & references used in this article: